• AU 2200mm wide hydraulic tilting batter bucket with BOCE,
  • 100mm pins, 486mm ibe and 570mm cp to cp,
  • Struck Capacity


  • AU 2200mm wide hydraulic tilting batter bucket with BOCE,
  • 100mm pins, 486mm ibe and 540mm cp to cp,
  • Struck Capacity


AU 1270mm wide 5 finger hydraulic grab attachment to suit excavator, 100mm pins, 486mm ibe and 540mm cp to cp



AU 1270mm wide 5 finger hydraulic grab attachment to suit excavator, 100mm pins, 486mm ibe and 570mm cp to cp



  • AU Trapezoidal bucket with bolt on edges,
  • 2180mm top width, 840mm bottom width,
  • 100mm pins, 486mm ibe and 570mm cp to cp


  • AU Trapezoidal bucket with bolt on edges,
  • 2180mm top width, 840mm bottom width,
  • 100mm pins, 486mm ibe and 540mm cp to cp


AU 2200mm wide Skeleton bucket with teeth and side shrouds, 150mm x 150mm gaps, 100mm pins, 486mm ibe and 570mm cp to c



AU 2200mm wide Skeleton bucket with teeth and side shrouds, 150mm x 150mm gaps, 100mm pins, 486mm ibe and 540mm cp to cp



AU 1020mm wide 5 finger manual grab to suit excavator, 100mm pins, 486mm ibe and 570mm cp to cp, comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitch.



AU 1020mm wide 5 finger manual grab to suit excavator, 100mm pins, 486mm ibe and 570mm cp to cp, comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitch.



2200mm wide Batter bucket, 100mm Pin, 540mm (CP to CP), 486mm (IBE), Struck capacity , BOCE 2250x250x25mm 14 x Holes @ 25(1″),152(6″) spacing



1600mm wide GP Bucket with teeth, 100mm Pin, 570mm (CP to CP), 486mm (IBE) Capacity  
 


  • AU 1600mm wide GP bucket with teeth, 100mm pins
  • 486mm ibe and 540mm cp to cp
  • Capacity


2022 JAWS 2020mm wide batter bucket with BOCE, 100mm pins, 420mm ibe and 580mm cp to cp, Capacity , Weight 1235kg,



1800mm wide GP bucket with teeth, suit, 115mm top pin hole, 100mm rear pin hole, 445mm ibe and 560mm cp to cp. Capacity struck



  • AU 850mm wide Trench bucket with teeth, (970mm wide at teeth),
  • 100mm pins, 486mm ibe and 540mm cp to cp


  • AU 850mm wide Trench bucket with teeth, (970mm wide at teeth),
  • 100mm pins, 486mm ibe and 570mm cp to cp


AU 2200mm wide skeleton bucket with teeth and side shrouds, 150mm x 150mm gaps, 100mm pins, 486mm ibe and 540mm cp to cp. (New but paint faded)



  • AU 600mm wide Trench bucket with teeth, (700mm wide at teeth),
  • 100mm pins, 486mm ibe and 570mm cp to cp


  • AU 600mm wide Trench bucket with teeth, (700mm wide at teeth),
  • 100mm pins, 486mm ibe and 540mm cp to cp


650mm wide compaction wheel to suit Excavator with 100mm Pin, 540mm (CP to CP), 486mm (IBE) , 1050mm wheel diameter



650mm wide compaction wheel to suit Excavator with 100mm Pin, 570mm (CP to CP), 486mm (IBE) , 1050mm wheel diameter



  • 2017 Volvo hydraulic quick hitch/ Double Acting
  • Machine Side-110mm front pin, 100mm rear pin
  • Machine Side-470mm front ibe, 430mm rear ibe and 570mm cp to cp
  • Pick up attachments with 110mm front pin, 100mm rear pin, 400mm ibe and approx 540mm to 640mm cp to cp



2022 Jaws 620mm wide Trench bucket with teeth and side cutters (780mm wide at side cutters), 100mm pins, 420mm ibe and 580mm cp to cp, Capacity , Weight 900kg,



2022 Jaws 620mm wide Trench bucket with teeth and side cutters (770mm wide at side cutters), 100mm pins, 420mm ibe and 580mm cp to cp, Capacity , Weight 905kg,



1150mm wide heavy duty GP bucket with teeth (1240mm wide at teeth), 110mm top pin, 100mm bottom pin, 470mm top ibe, 430mm bottom ibe and 570mm cp to cp



700mm wide Trench bucket with teeth and side cutters (770mm wide at teeth), 110mm top pin, 100mm bottom pin, 470mm top ibe, 430mm bottom ibe and 570mm cp to cp



AU 1310 mm long ripper with tooth and shroud, 100mm Pin, 540mm (CP to CP), 486mm (IBE)



  • AU 1330mm long ripper with tooth and shroud
  • 100mm Pin
  • 570mm (CP to CP)
  • 486mm (IBE)


Trapezoidal bucket 2000mm top width, 1000mm bottom width, suit excavator with 80mm top pin, 100mm rear pin, 305mm ibe and 525mm cp to cp,



  • MB Crushing bucket to suit excavator,
  • Model Bf120.4.
  • Suits 30-40T excavator.
  • We have 110mm, 100mm & 90mm pins available, 455mm ibe and 540mm cp to cp.
  • Mouth input height 540mm, width 1205mm.
  • Output size is adjustable.
  • Required Flow rate 190-260 l/m 



  • ATLAS HEAVY ENGINEERING HYD QUICK HITCH
  • WITH 110mm FRONT PIN, 100mm REAR PIN, 440mm IBE AND 645mm CP TO CP
  • PICK UP 110mm PIN, 415mm IBE AND APROX 620mm TO 670mm CP TO CP


Simex TF1000 hydraulic rotary cutter, Suit 20T, 30T or 40T diggers. Has head brackets to suit either machines. Requires a Case drain on machine. Oil flow rate 150-250 L/m



Head Bracket
, Distance Between Centre’s 585mm, Distance between Ears 420mm and pin size 100mm.



Contatore Engineering head bracket, suit excavator, 100mm pins, 420mm ibe and 585mm cp to cp,



Contatore Engineering head bracket, suit excavator, 100mm pins, 400mm ibe and 545mm cp to cp,