AU 1600mm wide GP bucket with teeth and side shrouds (1730mm wide at teeth), 120mm pins, 550mm ibe and 625mm cp to cp



  • AU 2500mm wide Skeleton bucket with teeth and side shrouds
  • 200mm x 200mm gaps
  • 120mm pins, 550mm ibe and 625mm cp to cp
  • This would suit a 50 ton machine.


1300mm wide 5 finger hydraulic grab, 120mm pins, 475mm ibe and 580mm cp to cp



  • AU 1450mm long ripper with tooth
  • 120mm Pins
  • 625mm (CP to CP)
  • 550mm (IBE)



ECH 780mm wide trench bucket with teeth and side cutters, (900mm wide at side cutters), 120mm top pin, 110mm rear pin, 500mm ibe and 635mm cp to cp



  • Tefra hydraulic quick hitch to suit excavator
  • 120mm pins, 475mm ibe and 590mm cp to cp
  • Pick up attachments with 115mm pins, 420mm ibe and aprox 530mm to 630mm cp to cp


1500mm WIDE GP BUCKET WITH TEETH, 120mm PINS, 430mm IBE AND 580mm CP TO CP. CAPACITY STRUCK



4080mm wide push blade with bolt on edge, suit excavator, 120mm pins, 470mm ibe and 585mm cp to cp



  • MB-S23 2330mm wide rotating hydraulic screening bucket with teeth.
  • Has 40mm screens fitted.
  • Rotation is both ways.
  • Has 90-120 pins size available with 480mm ibe and 575mm cp to cp.
  • Requires case drain line fitted on digger.
  • Flow rate max 160l/m


2023 AU 50T hydraulic grab cylinder, to suit out 120mm pin grabs



120mm Excavator Bucket Pin, 800mm Long



  • Spacer 120mm pin size
  • 240mm outside diameter
  • 25mm thickness.


  • Spacer 120mm pin size
  • 240mm outside diameter
  • 20mm thickness.


  • Spacer 120mm pin size
  • 240mm outside diameter
  • 10mm thickness.


  • Shim
  • 120mm pin size
  • 240mm outside diameter
  • 1mm thickness



  • Shim
  • 120mm pin size
  • 240mm outside diameter
  • 2mm thickness