• Hydraulic Rock cutting saw to suit excavator
• 80mm pins, 330mm ibe and 470mm cp to cp
• 2225mm diameter blade, 14mm thick
• Comes on frame with forklift pockets
• Includes spare blade
• Requires a 3rd line (case drain)

CONCRETE LIFTING ATTACHMENT. LAST JOB WAS AT PERTH AIRPORT REMOVING PARTS OF THE RUNWAY.

AU 980mm wide 5 finger hydraulic grab attachment to suit excavator, 80mm pins, 350mm ibe and 445mm cp to cp

AU 980mm wide 5 finger hydraulic grab attachment to suit excavator, 80mm pins, 350mm ibe and 470mm cp to cp

• AU Trapezoidal bucket with bolt on edges,
• 2000mm top width, 840mm bottom width,
• 80mm pins, 350mm ibe and 445mm cp to cp

• AU 1900mm wide hydraulic tilting batter bucket with BOCE, 80mm pins,
• 350mm ibe and 470mm cp to cp

• AU 1900mm wide hydraulic tilting batter bucket with BOCE, 80mm pins,
• 350mm ibe and 445mm cp to cp

AU, 955mm wide 5 finger manual grab to suit excavator, 80mm pins, 350mm ibe and 470mm cp to cp. Comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitch

AU, 955mm wide 5 finger manual grab to suit excavator, 80mm pins, 350mm ibe and 450mm cp to cp. Comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitch

• AU 1760mm wide stick rake with teeth,
• 240mm wide spacings,
• suit excavator with 80mm pins, 350mm ibe and 470mm cp to cp.
• Tynes 35mm thick

• AU 1760mm wide stick rake with teeth,
• 240mm wide spacings,
• suit excavator with 80mm pins, 350mm ibe and 445mm cp to cp.
• Tynes 35mm thick

AU 1800mm wide skeleton bucket with teeth and side shrouds, 75mm x 150mm gaps, 80mm pins, 350mm ibe and 470mm cp to cp. Fitted with J350 Teeth

• AU 1800mm wide skeleton bucket with teeth and side shrouds
•  100mm x 150mm gaps
• 80mm pins, 350mm ibe and 470mm cp to cp
• Fitted with J350 Teeth

AU 1800mm wide skeleton bucket with teeth and side shrouds, 75mm x 150mm gaps, 80mm pins, 350mm ibe and 445mm cp to cp. Fitted with J350 Teeth

AU 1800mm wide skeleton bucket with teeth and side shrouds, 100mm x 150mm gaps, 80mm pins, 350mm ibe and 445mm cp to cp. Fitted with J350 Teeth

• 1900mm wide Batter bucket, 80mm Pin, 470mm (CP to CP)
• 350mm (IBE)
• Struck capacity 1m3
• BOCE 1970x250x20mm 12 x Holes @ 19(3/4),152(6″) spacing

1900mm wide Batter Bucket, 80mm Pin, 445mm (CP to CP), 350mm (IBE), Struck capacity 1m3 

1900mm wide Batter Bucket, 80mm Pin, 445mm (CP to CP), 350mm (IBE), Struck capacity .75m3

1900mm wide Batter Bucket, 80mm Pin, 470mm (CP to CP), 350mm (IBE), Struck capacity .75m3

• AU 650mm wide trench bucket with teeth, side cutters and side shrouds, (760mm wide at side cutters),
• suit excavator, 80mm pins, 350mm ibe and 470mm cp to cp

• AU 650mm wide trench bucket with teeth, side cutters and side shrouds, (760mm wide at side cutters),
• suit excavator, 80mm pins, 350mm ibe and 445mm cp to cp

AU 1100 mm long Double ripper with tooth and shroud, 80mm Pin, 470mm (CP to CP), 350mm (IBE)

570mm wide compaction wheel with 80mm Pins, 470mm (CP to CP), 350mm (IBE) , 880mm wheel diameter

AU 1100 mm long Double ripper with tooth and shroud, 80mm Pin, 445mm (CP to CP), 350mm (IBE)

570mm wide compaction wheel with 80mm Pins, 445mm (CP to CP), 350mm (IBE) , 880mm wheel diameter

• AU 650mm wide trench bucket with BOCE, (700mm wide at edge),
• 80mm pins
• 470mm cp to cp
• 350mm ibe and

• AU 650mm wide trench bucket with BOCE, (700mm wide at edge)
• 80mm pins
• 445mm cp to cp
• 350mm ibe and

• Hydraram HSS22RV, Scrap/Steel Shear 15 to 30 ton machines.
• We will change the head bracket to suit your machine
• Hydaram HSS Scrap & Iron cutters; Designed and used for demolishing steel structures and cutting scrap.
• Special and unique design used to cut steel. The jaw has the shape of the beak of a parrot.
• The materials you want to cut stay in the jaw while being pulled in, ensuring a fast and effective performance.
• The shears are made out of a wear-resistant steel mix; this guarantees you less maintenance and a long life cycle.
• The HSS-scrap shear is designed for the demolition of heavy steel structures and the processing of scrap.

1500mm wide Manual Pallet Fork to suit Excavator with 80mm Pin, 445mm (CP to CP), 350mm (IBE) , fitted with 1530mm long tynes Class 4

1500mm wide Manual Pallet Fork to suit Excavator with 80mm Pin, 470mm (CP to CP), 350mm (IBE) , fitted with 1530mm long tynes Class 4

2014 Doosan hydraulic quick hitch to suit excavator, 80mm pins, 335mm ibe and 465mm cp to cp, pick up attachments with 80mm pins, 330mm ibe and 380mm to 520mm cp to cp

1200mm wide Heavy Duty GP bucket with teeth (1400mm total width), 80mm pins, 325mm ibe and 440mm cp to cp

AU 1100mm wide GP bucket with cutting edge, 80mm pins, 350mm ibe and 445mm cp to cp

AU 1100mm wide GP bucket with teeth, 80mm pins, 350mm ibe and 470mm cp to cp

AU 1100mm wide GP bucket with teeth, 80mm pins, 350mm ibe and 445mm cp to cp

• Hydraram MK10, MK10 Multi Crusher with hydraulic Steel jaws 8 to 18 ton.
• We will change headbracket to suit your machine.
• Jaw opening 340mm,
• The versatile Hydraram multiprocessors are designed for the toughest operating conditions and fit into countless vehicles of 6 – 18tonnes of operating weight.
• Built of wear-resistant Hardox-400® steel, the MK series offers a long service life with minimal maintenance.
• With this robust tool, demolition and recycling work of all kinds can be carried out without changing the attaching unit.
• For an extremely fast working cycle, each multiprocessor is equipped with a rapid flow valve.
• Various jaws can be mounted in this multiprocessor.
• It is possible to change the hydraulic dentures within 5 minutes on the construction site.
• The teeth and knives are replaceable and easy to replace.