End Edge 35mm suits CAT D8 N, R, T, D9 N, R, T, 844
$220.00 Plus GST
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5 inches (800 mm) long, requiring 5 plow bolts sized 1 inch x 3 inches (25.4 mm x 76.2 mm) and 5 matching hex nuts; the bolt hole spacing is 6 inches (152.4 mm) from center to center, with the first hole positioned 2.875 inches (73 mm) from the edge.
8 in stock
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5 inches (800 mm) long, requiring 5 plow bolts sized 1 inch x 3 inches (25.4 mm x 76.2 mm) and 5 matching hex nuts; the bolt hole spacing is 6 inches (152.4 mm) from center to center, with the first hole positioned 2.875 inches (73 mm) from the edge.
{
Related Products
-
$550.00 Plus GSTCaterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick,...Read MoreSKU: 1099212Available: 2
Add to Quote -
$550.00 Plus GSTCaterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick,...Read MoreSKU: 9W6656Available: 4
Add to Quote -
$520.00 Plus GSTCaterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches...Read MoreSKU: 7T9126Available: 7
Add to Quote -
$440.00 Plus GSTCaterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16...Read MoreSKU: 9W6609Available: 1
Add to Quote -
$250.00 Plus GSTCaterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...Read MoreSKU: 3G8288Available: 1
Add to Quote -
$250.00 Plus GSTCaterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...Read MoreSKU: 3G8287Available: 1
Add to Quote -
$220.00 Plus GSTCaterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28...Read MoreSKU: 1U0761Available: 3
Add to Quote -
$35.00 Plus GSTCaterpillar style standard, dirt bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer.Read MoreSKU: 1U3352Available: 7
Add to Quote
