Shop
Filter Widget
Filter by Category
Showing 1–36 of 114 resultsSorted by price: high to low
-
$11,500.00 Plus GST1800mm wide GP bucket with teeth, suit, 115mm top pin hole, 100mm rear pin hole, 445mm ibe and 560mm cp to cp. Capacity 2.2m3 struckRead More1800mm wide GP bucket with teeth, suit, 115mm top pin hole, 100mm rear pin hole, 445mm ibe and 560mm cp to cp. Capacity 2.2m3 struckSKU: SB200534GS
Available: 1
Add to Quote -
$11,000.00 Plus GST1800mm GP BUCKET WITH TEETH AND SIDE CUTTERS, 130mm TOP PIN, 115mm REAR PIN, 540mm TOP IBE, 520mm REAR IBE, 770mm CP TO CPRead More1800mm GP BUCKET WITH TEETH AND SIDE CUTTERS, 130mm TOP PIN, 115mm REAR PIN, 540mm TOP IBE, 520mm REAR IBE, 770mm CP TO CPSKU: CB141102
Available: 1
Add to Quote -
$8,000.00 Plus GSTAU 1330mm long ripper with tooth and shroud, 115mm Pin,Read MoreAU 1330mm long ripper with tooth and shroud, 115mm Pin,SKU: 115BEXCRIP
Available: 2
Add to Quote -
$8,000.00 Plus GSTAU 1330mm long ripper with tooth and shroud, 115mm Pin, 580mm (CP to CP), 475mm (IBE)Read MoreAU 1330mm long ripper with tooth and shroud, 115mm Pin, 580mm (CP to CP), 475mm (IBE)SKU: 115AEXCRIP
Available: 1
Add to Quote -
$7,500.00 Plus GSTATLAS 1200mm WIDE TRENCH BUCKET WITH TEETH, 130mm PIN HOLES, 555mm IBE AND 700mm CP TO CP. CAPACITY 2.0M STRUCKRead MoreATLAS 1200mm WIDE TRENCH BUCKET WITH TEETH, 130mm PIN HOLES, 555mm IBE AND 700mm CP TO CP. CAPACITY 2.0M STRUCKSKU: SB161229GS
Available: 1
Add to Quote -
$7,500.00 Plus GST1500mm wide hydraulic tilting batter bucket with BOCE, 60mm pins, 260mm ibe and 430mm cp to cpRead More
- 1500mm wide hydraulic tilting batter bucket with BOCE,
- 60mm pins, 260mm ibe and 430mm cp to cp
SKU: 60CTILTBKTAvailable: 1
Add to Quote -
$7,500.00 Plus GST1500mm wide hydraulic tilting batter bucket with BOCE, 60mm pins, 260mm ibe and 370mm cp to cpRead More
- 1500mm wide hydraulic tilting batter bucket with BOCE,
- 60mm pins, 260mm ibe and 370mm cp to cp
SKU: 60BTILTBKTAvailable: 5
Add to Quote -
$7,500.00 Plus GST11500mm wide hydraulic tilting batter bucket with bolt on edge, 60mm pins, 260mm ibe and 300mm cp to cpRead More
- 11500mm wide hydraulic tilting batter bucket with bolt on edge,
- 60mm pins, 260mm ibe and 300mm cp to cp
SKU: 60ATILTBKTAvailable: 2
Add to Quote -
$6,750.00 Plus GSTAU 760mm wide 5 finger hydraulic grab, 60mm pins, 280mm ibe and 430mm cp to cpRead MoreAU 760mm wide 5 finger hydraulic grab, 60mm pins, 280mm ibe and 430mm cp to cpSKU: 60CHYDGRAB
Available: 1
Add to Quote -
$6,750.00 Plus GSTAU 765mm wide 5 finger hydraulic grab, 60mm pins, 260mm ibe and 370mm cp to cpRead MoreAU 765mm wide 5 finger hydraulic grab, 60mm pins, 260mm ibe and 370mm cp to cpSKU: 60BHYDGRAB
Available: 5
Add to Quote -
$6,750.00 Plus GSTAU 760mm wide 5 finger hydraulic grab attachment to suit excavator, 60mm pins, 260mm ibe and 300mm cp to cpRead MoreAU 760mm wide 5 finger hydraulic grab attachment to suit excavator, 60mm pins, 260mm ibe and 300mm cp to cpSKU: 60AHYDGRAB
Out of stock
Add to Quote -
$6,325.00 Plus GSTAU 695mm wide 5 finger manual grab to suit excavator with 60mm pins, 260mm ibe and 430mm cp to cp, comes with weld on bracket....Read MoreAU 695mm wide 5 finger manual grab to suit excavator with 60mm pins, 260mm ibe and 430mm cp to cp, comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitchSKU: 60CMECHGRAB
Available: 2
Add to Quote -
$6,325.00 Plus GSTAU 695mm wide 5 finger manual grab to suit excavator with 60mm pins, 260mm ibe and 370mm cp to cp, comes with weld on bracket....Read MoreAU 695mm wide 5 finger manual grab to suit excavator with 60mm pins, 260mm ibe and 370mm cp to cp, comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitchSKU: 60BMECHGRAB
Available: 3
Add to Quote -
$6,325.00 Plus GSTAU 695mm wide 5 finger manual grab to suit excavator with 60mm pins, 260mm ibe and 300mm cp to cp, comes with weld on bracket....Read MoreAU 695mm wide 5 finger manual grab to suit excavator with 60mm pins, 260mm ibe and 300mm cp to cp, comes with weld on bracket. Bracket on grab is only tacked welded, needs fully welding once grab is aligned on quick hitchSKU: 60AMECHGRAB
Available: 1
Add to Quote -
$5,700.00 Plus GSTTRAPEZOIDAL BUCKET WITH TEETH 1150mm TOP AND 480mm BOTTOM 60mm PINS, 230mm IBE AND 380mm CP, TO FIT KATO 550, KOMATSU PC100, PC120 , PW100,...Read MoreTRAPEZOIDAL BUCKET WITH TEETH 1150mm TOP AND 480mm BOTTOM 60mm PINS, 230mm IBE AND 380mm CP, TO FIT KATO 550, KOMATSU PC100, PC120 , PW100, SUMITOMO LS2600, 2650SKU: SB1071
Available: 1
Add to Quote -
$5,000.00 Plus GST450mm WIDE COMPACTION WHEEL, (535mm TOTAL WIDTH), TO SUIT EXCAVATOR WITH 60mm PINS, 260mm IBE AND 370mm CP TO CP. 540mm WHEEL DIAMETERRead More450mm WIDE COMPACTION WHEEL, (535mm TOTAL WIDTH), TO SUIT EXCAVATOR WITH 60mm PINS, 260mm IBE AND 370mm CP TO CP. 540mm WHEEL DIAMETERSKU: 60BCOMPWHEEL
Available: 2
Add to Quote -
$5,000.00 Plus GST450mm WIDE COMPACTION WHEEL, (535mm TOTAL WIDTH), TO SUIT EXCAVATOR WITH 60mm PINS, 260mm IBE AND 300mm CP TO CP. 540mm WHEEL DIAMETERRead More450mm WIDE COMPACTION WHEEL, (535mm TOTAL WIDTH), TO SUIT EXCAVATOR WITH 60mm PINS, 260mm IBE AND 300mm CP TO CP. 540mm WHEEL DIAMETERSKU: 60ACOMPWHEEL
Available: 1
Add to Quote -
$5,000.00 Plus GST450mm WIDE COMPACTION WHEEL, (535mm TOTAL WIDTH), TO SUIT EXCAVATOR WITH 60mm PINS, 280mm IBE AND 430mm CP TO CP. 540mm WHEEL DIAMETERRead More450mm WIDE COMPACTION WHEEL, (535mm TOTAL WIDTH), TO SUIT EXCAVATOR WITH 60mm PINS, 280mm IBE AND 430mm CP TO CP. 540mm WHEEL DIAMETERSKU: 60CCOMPWHEEL
Available: 2
Add to Quote -
$5,000.00 Plus GSTAU 1545mm wide stick rake with teeth, 160mm wide spacings, suit excavator with 60mm pins, 260mm ibe and 370mm cp to cp. Tynes 25mm thickRead More
- AU 1545mm wide stick rake with teeth,
- 160mm wide spacings,
- suit excavator with 60mm pins, 260mm ibe and 370mm cp to cp.
- Tynes 25mm thick
SKU: 60BSTICKRAKEAvailable: 1
Add to Quote -
$5,000.00 Plus GSTAU 1545mm wide stick rake with teeth, 160mm wide spacings, suit excavator with 60mm pins, 260mm ibe and 300mm cp to cp. Tynes 25mm thickRead More
- AU 1545mm wide stick rake with teeth,
- 160mm wide spacings,
- suit excavator with 60mm pins, 260mm ibe and 300mm cp to cp.
- Tynes 25mm thick
SKU: 60ASTICKRAKEAvailable: 1
Add to Quote -
$4,950.00 Plus GST1500mm wide Skeleton bucket with teeth and side cutters, 140mm x 70mm gaps, 60mm pins, 260mm ibe and 300mm cp to cpRead More1500mm wide Skeleton bucket with teeth and side cutters, 140mm x 70mm gaps, 60mm pins, 260mm ibe and 300mm cp to cpSKU: 60ASKELBKT
Available: 2
Add to Quote -
$4,950.00 Plus GSTAU 1500mm wide skeleton bucket with teeth and side cutters 70mm x 140mm gaps suit excavator with 60mm pins, 280mm ibe and 430mm cp to...Read More
- AU 1500mm wide skeleton bucket with teeth and side cutters
- 70mm x 140mm gaps
- suit excavator with 60mm pins, 280mm ibe and 430mm cp to cp
SKU: 60CSKELBKTOut of stock
Add to Quote -
$4,950.00 Plus GST1500mm wide Skeleton bucket with teeth and side cutters, 140mm x 70mm gaps, 60mm pins, 260mm ibe and 370mm cp to cpRead More1500mm wide Skeleton bucket with teeth and side cutters, 140mm x 70mm gaps, 60mm pins, 260mm ibe and 370mm cp to cpSKU: 60BSKELBKT
Available: 2
Add to Quote -
$4,500.00 Plus GST1220mm wide Manual Pallet Fork to suit Excavator with 60mm Pin, 370mm (CP to CP), 260mm (IBE) , fitted with 1530mm long tynes Class 3Read More1220mm wide Manual Pallet Fork to suit Excavator with 60mm Pin, 370mm (CP to CP), 260mm (IBE) , fitted with 1530mm long tynes Class 3SKU: 60BEXCFORK
Available: 3
Add to Quote -
$4,500.00 Plus GST1220mm wide Manual Pallet Fork to suit Excavator with 60mm Pin, 300mm (CP to CP), 260mm (IBE) , fitted with 1530mm long tynes Class 3Read More1220mm wide Manual Pallet Fork to suit Excavator with 60mm Pin, 300mm (CP to CP), 260mm (IBE) , fitted with 1530mm long tynes Class 3SKU: 60AEXCFORK
Available: 1
Add to Quote -
$4,500.00 Plus GSTAU 1500mm wide batter bucket with bolt on edge, 60mm pins, 260mm ibe and 370mm cp to cpRead MoreAU 1500mm wide batter bucket with bolt on edge, 60mm pins, 260mm ibe and 370mm cp to cpSKU: 60BMUDBKT
Out of stock
Add to Quote -
$4,500.00 Plus GSTAU 1500mm wide batter bucket with BOCE, 60mm pins, 260mm ibe and 300mm cp to cpRead MoreAU 1500mm wide batter bucket with BOCE, 60mm pins, 260mm ibe and 300mm cp to cpSKU: 60AMUDBKT1500
Available: 2
Add to Quote -
$4,450.00 Plus GSTMKL 850mm GP BUCKET WITH EDGE, 60mm PINS, 260mm IBE AND 370mm CP TO CPRead MoreMKL 850mm GP BUCKET WITH EDGE, 60mm PINS, 260mm IBE AND 370mm CP TO CPSKU: SB126027
Available: 1
Add to Quote -
$4,000.00 Plus GSTHydraram HSS10RV, Scrap/Steel Shear 8 to 12 ton machines. We will change the head bracket to suit your machine. Jaw opening 405mm, Jaw depth 355mm...Read More
- Hydraram HSS10RV, Scrap/Steel Shear 8 to 12 ton machines.
- We will change the head bracket to suit your machine.
- Jaw opening 405mm,
- Jaw depth 355mm
- Hydaram HSS Scrap & Iron cutters; Designed and used for demolishing steel structures and cutting scrap.
- Special and unique design used to cut steel.
- The jaw has the shape of the beak of a parrot.
- The materials you want to cut stay in the jaw while being pulled in, ensuring a fast and effective performance.
- The shears are made out of a wear-resistant steel mix; this guarantees you less maintenance and a long life cycle.
- The HSS-scrap shear is designed for the demolition of heavy steel structures and the processing of scrap.
SKU: HYHSS10RVAdd to Quote This product has multiple variants. The options may be chosen on the product page -
$4,000.00 Plus GSTR M 600mm TRENCHING BUCKET WITH CAT 30SRS TEETH, 60mm PINS, 260mm IBE AND 370mm CP TO CP IRSIH MADE ,KOMATSU PC100 KOMATSU PC120Read MoreR M 600mm TRENCHING BUCKET WITH CAT 30SRS TEETH, 60mm PINS, 260mm IBE AND 370mm CP TO CP IRSIH MADE ,KOMATSU PC100 KOMATSU PC120SKU: SB126035
Available: 1
Add to Quote -
$4,000.00 Plus GST385mm wide hydraulic Log grab to suit excavator, 60mm pins, 260mm ibe and 370mm cp to cp. Can rotate head bracket 360Read More385mm wide hydraulic Log grab to suit excavator, 60mm pins, 260mm ibe and 370mm cp to cp. Can rotate head bracket 360SKU: 60BEXCLOGGRAB
Available: 2
Add to Quote -
$4,000.00 Plus GST385mm wide hydraulic Log grab to suit excavator, 60mm pins, 260mm ibe and 300mm cp to cp. Can rotate head bracket 360Read More385mm wide hydraulic Log grab to suit excavator, 60mm pins, 260mm ibe and 300mm cp to cp. Can rotate head bracket 360SKU: 60AEXCLOGGRAB
Available: 1
Add to Quote -
$4,000.00 Plus GST400mm wide trench bucket with teeth and side cutters, (475mm wide at side cutters), 60mm pins, 280mm ibe and 430mm cp to cpRead More
- 400mm wide trench bucket with teeth and side cutters, (475mm wide at side cutters),
- 60mm pins, 280mm ibe and 430mm cp to cp
SKU: 60CTRENCHBKTAvailable: 2
Add to Quote -
$4,000.00 Plus GST450mm wide trench bucket with teeth and side cutters (520mm wide at side cutters), 60mm pins, 260mm ibe and 300mm cp to cpRead More
- 450mm wide trench bucket with teeth and side cutters (520mm wide at side cutters),
- 60mm pins, 260mm ibe and 300mm cp to cp
SKU: 60ATRENCHBKTAvailable: 2
Add to Quote -
$3,500.00 Plus GSTAU 730mm long ripper with tooth and shroud, 60mm Pin, 430mm (CP to CP), 280mm (IBE)Read MoreAU 730mm long ripper with tooth and shroud, 60mm Pin, 430mm (CP to CP), 280mm (IBE)SKU: 60CEXCRIP
Available: 6
Add to Quote -
$3,500.00 Plus GSTAU 730mm long ripper with tooth and shroud, 60mm Pin, 370mm (CP to CP), 260mm (IBE)Read MoreAU 730mm long ripper with tooth and shroud, 60mm Pin, 370mm (CP to CP), 260mm (IBE)SKU: 60BEXCRIP
Available: 2
Add to Quote
Showing 1–36 of 114 resultsSorted by price: high to low