Shop
Showing 1–36 of 155 resultsSorted by price: high to low
-
$200,000.00 Plus GST2011 JOHN DEERE 672G 6 wd articulated grader John Deere 9 litre 6 cylinder turbo diesel engine Interim Tier IV/Stage III B,195 hp 8 gears...Read More
- 2011 JOHN DEERE 672G 6 wd articulated grader
- John Deere 9 litre 6 cylinder turbo diesel engine
- Interim Tier IV/Stage III B,195 hp
- 8 gears forward/reverse
- standard controls
- 12 ft. blade
- rear rippers
- ROPS, aircon cab
- emergency stops, battery isolator
- auto lube system
- 8970 hours
- 18395 kg
- good condition
SKU: GR29_RJVAvailable: 1
Add to Quote -
$37,500.00 Plus GST2009 TRANSHAUL EQUIPMENT PLANT TRAILER, tandem axle pig trailer, 8010 mm x 2490mm usable deck space including beaver tail , 2200mm ramps hydraulic/electric operated, chequer...Read More
2009 TRANSHAUL EQUIPMENT PLANT TRAILER, tandem axle pig trailer, 8010 mm x 2490mm usable deck space including beaver tail , 2200mm ramps hydraulic/electric operated, chequer plate floor, 5" round axles, air drum brakes with 4 x spring park brake booster, 9 leaf u/s spring suspension, 75mm pintle eye hitch, spider rims, 25570R22.5 tubeless tyres, spare wheel, 7 tie down points each side , wind down drop leg, LED lights, toolbox, 24 volt power pack for ramps, gate pockets, Anderson plug on tow hitch to charge batteries, tare 5000kg, ATM 18000kg, good condition.
SKU: CAPE-TR86Available: 1
Add to Quote -
$250.00 – $1,250.00 Plus GST1200mm diameter auger bit 100mm x 100mm connection end 1800mm total lengthRead More
- 1200mm diameter auger bit
- 100mm x 100mm connection end
- 1800mm total length
SKU: SG240101Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GST1300mm WIDE AUGER ATTACHMENT APPROX 2000mm TOTAL LENGTH 100mm x 100mm CONNECTION BITRead More
- 1300mm WIDE AUGER ATTACHMENT
- APPROX 2000mm TOTAL LENGTH
- 100mm x 100mm CONNECTION BIT
SKU: SG170914Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GST1200mm WIDE AUGER BIT APPROX 1700mm LONG 75/75mm CONNECTION BITRead More
- 1200mm WIDE AUGER BIT
- APPROX 1700mm LONG
- 75/75mm CONNECTION BIT
SKU: SG170913Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU182000AUGER-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU182000AUGER-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU181500AUGER-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU181500AUGER-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD30-7, Auger Drive suit 20/30T excavator 100/100mm drive various head brackets to suit Flow rate 230L/m Max Pressure 240 Bar.Read More
- DIGGA PD30-7, Auger Drive
- suit 20/30T excavator
- 100/100mm drive
- various head brackets to suit
- Flow rate 230L/m Max Pressure 240 Bar.
SKU: SG220402Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE SUIT 20/50T EXCAVATOR 100/100mm DRIVE Flow rate 230L/m Max Pressure 240 Bar.Read More
- DIGGA PD50-7 HYD AUGER DRIVE
- SUIT 20/50T EXCAVATOR
- 100/100mm DRIVE
- Flow rate 230L/m
- Max Pressure 240 Bar.
SKU: SG201105Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE SUIT 20/50T EXCAVATOR 100/100mm DRIVE Flow rate 230L/m Max Pressure 240 BarRead More
- DIGGA PD50-7 HYD AUGER DRIVE
- SUIT 20/50T EXCAVATOR
- 100/100mm DRIVE
- Flow rate 230L/m
- Max Pressure 240 Bar
SKU: SG190703Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE SUIT 20/50T EXCAVATOR 75/75mm DRIVE HAVE VARIOUS HEAD BRACKETS TO SUIT Flow rate 230L/m Max Pressure 240 Bar.Read More
- DIGGA PD50-7 HYD AUGER DRIVE
- SUIT 20/50T EXCAVATOR
- 75/75mm DRIVE
- HAVE VARIOUS HEAD BRACKETS TO SUIT
- Flow rate 230L/m
- Max Pressure 240 Bar.
SKU: SG170909Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE TO SUIT 20/50T EXCAVATOR 100/100mm DRIVE HAVE VARIOUS HEAD BRACKETS TO SUIT Flow rate 230L/m, Max Pressure 240 Bar.Read More
- DIGGA PD50-7 HYD AUGER DRIVE TO SUIT 20/50T EXCAVATOR
- 100/100mm DRIVE
- HAVE VARIOUS HEAD BRACKETS TO SUIT
- Flow rate 230L/m,
- Max Pressure 240 Bar.
SKU: SG160103Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD8 auger drive to suit 5/10T excavator 75/75mm drive Various head brackets to suit Flow Rate 114L/m, Max pressure 240 Bar Has 100mm connect...Read More
- Digga PD8 auger drive to suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow Rate 114L/m, Max pressure 240 Bar
- Has 100mm connect end
SKU: SG230615Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD15 auger drive 10/20T excavator 75/75mm drive Various head brackets to suit Flow 230L/m max pressure 240 BarRead More
- Digga PD15 auger drive
- 10/20T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow 230L/m
- max pressure 240 Bar
SKU: SG230301Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD6 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suit. Flow Rate 114L/m Max pressure 240 BarRead More
- Digga PD6 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit.
- Flow Rate 114L/m
- Max pressure 240 Bar
SKU: SG230201Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD18-5 auger drive suit 10/20T excavator, 75mm x 75mm drive Various head brackets to suit max flow 230 LPM max pressure 240 BARRead More
- Digga PD18-5 auger drive
- suit 10/20T excavator,
- 75mm x 75mm drive
- Various head brackets to suit
- max flow 230 LPM
- max pressure 240 BAR
SKU: SG221203Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD15-5 auger drive suit 10/20T excavator 75/75mm drive Various head brackets to suit Flow Rate 230L/m Max pressure 240 BarRead More
- Digga PD15-5 auger drive
- suit 10/20T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow Rate 230L/m
- Max pressure 240 Bar
SKU: SG210508Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD8-5 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suitRead More
- Digga PD8-5 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
SKU: SG200210Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD8-5 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suitRead More
- Digga PD8-5 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
SKU: SG200202Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD18-5 auger drive suit 10/20T excavator 75/75mm drive Various head brackets to suit Flow 230L/m max pressure 240 BarRead More
- Digga PD18-5 auger drive
- suit 10/20T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow 230L/m
- max pressure 240 Bar
SKU: SG190705Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD6 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suit Flow Rate 114L/m Max pressure 240 BarRead More
- Digga PD6 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow Rate 114L/m
- Max pressure 240 Bar
SKU: SG190504GSAvailable: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTAuger Drive to suit 5/10T Excavators Has 75x75 drive Have various head brackets to suitRead More
- Auger Drive to suit 5/10T Excavators
- Has 75x75 drive
- Have various head brackets to suit
SKU: SG170907Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTAUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE SUIT 10/15T EXCAVATOR 75/75mm DriveRead More
- AUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE
- SUIT 10/15T EXCAVATOR
- 75/75mm Drive
SKU: SG140303Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTAUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE SUIT 10/15T EXCAVATOR 75mm DriveRead More
- AUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE
- SUIT 10/15T EXCAVATOR
- 75mm Drive
SKU: SG140302Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GST950mm wide auger bit 75mm x 75mm connection end total length 1200mmRead More
- 950mm wide auger bit
- 75mm x 75mm connection end
- total length 1200mm
SKU: SG230616Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTDigga PD4HF-5 High flow auger drive suit 5-10 Tonne excavator 75mm x 75mm connection end various head brackets to suit Max flow rate 230 L/mRead More
- Digga PD4HF-5 High flow auger drive
- suit 5-10 Tonne excavator
- 75mm x 75mm connection end
- various head brackets to suit
- Max flow rate 230 L/m
SKU: SG230208Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTAUGERTORQUE 4500MAX EARTH DRILL HYD AUGER DRIVE SUIT 2-5T EXCAVATOR 65mm DriveRead More
- AUGERTORQUE 4500MAX EARTH DRILL HYD AUGER DRIVE
- SUIT 2-5T EXCAVATOR
- 65mm Drive
SKU: SG210507Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GST600mm wide rock auger bit 2100mm length 100mm x 100mm connection bitRead More
- 600mm wide rock auger bit
- 2100mm length
- 100mm x 100mm connection bit
SKU: SG190704Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTManitou telehandler Head bracket mount for augerRead More
Manitou telehandler Head bracket mount for auger
SKU: SG190504Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GST950mm WIDE AUGER BIT 1700mm LONG 75/75mm CONNECTIONRead More
- 950mm WIDE AUGER BIT
- 1700mm LONG
- 75/75mm CONNECTION
SKU: SG170916Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GST1000mm WIDE AUGER BIT 1500mm LONG 75/75mm CONNECTIONRead More
- 1000mm WIDE AUGER BIT
- 1500mm LONG
- 75/75mm CONNECTION
SKU: SG170910Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTSKU: AU18900AUGER-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$125.00 – $625.00 Plus GSTDigga PDX2-2 Auger drive to suit mini excavator 65mm round drive 30mm pins, 110mm ibe 125mm cp to cpRead More
- Digga PDX2-2 Auger drive to suit mini excavator
- 65mm round drive
- 30mm pins,
- 110mm ibe
- 125mm cp to cp
SKU: SG240332GSAvailable: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$125.00 – $625.00 Plus GST900mm wide heavy duty rock auger bit 2000mm long 100/100mm connection endRead More
- 900mm wide heavy duty rock auger bit
- 2000mm long
- 100/100mm connection end
SKU: SG220407Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
Showing 1–36 of 155 resultsSorted by price: high to low