Shop
Filter Widget
Filter by Category
All Products
Pin Size
Telehandler Fitting
Showing 1–36 of 162 resultsSorted by price: high to low
-
$21,500.00 Plus GSTCompliance (YOM): 2012 Serial Number: 2012/03076 Engine Number: BY6798 Hours: 2056 Cab Type: Enclosed with aircon Engine Type: 4-cylinder turbo diesel Engine Make/Model: Kubota V1505T...Read More
- Compliance (YOM): 2012
- Serial Number: 2012/03076
- Engine Number: BY6798
- Hours: 2056
- Cab Type: Enclosed with aircon
- Engine Type: 4-cylinder turbo diesel
- Engine Make/Model: Kubota V1505T
- Fuel Type: Diesel
- Transmission Type: Hydrostatic Gears: 2 speeds
- Suspension Type: Front & Rear: Independent coil spring/shock absorber
- Brake Type Drum/ Disc: Hydrostatic and mechanical brakes (brake drums/shoes)
- Drive 4WD / 2WD: 4WD
- Front wheel track dimensions: 950mm sweep mode, 1190mm transport mode
- Colour (Exterior): Green
- Colour (Interior): Grey
- Tyre Size (Front): 155/70R12C
- Tyre Size (Rear): 155/70R12C
- Number of Seats: One
- Sweeping Width: Minimum 1300mm Maximum 2050mm
- Speed Sweeping: 13km/h maximum Transport Speed: 40km/h maximum
- Features: Ride on compact footpath & street vacuum sweeper, 3 stage dust control,
- Features: Vari-track Extendable Front track – 950mm sweep mode, 1190mm transport mode
- Fitted Accessories: air conditioning, reverse camera
- Note hand high pressure pump not working
SKU: SG240201Available: 1
Add to Quote -
$13,500.00 Plus GSTCONCRETE LIFTING ATTACHMENT. LAST JOB WAS AT PERTH AIRPORT REMOVING PARTS OF THE RUNWAY.Read More
CONCRETE LIFTING ATTACHMENT. LAST JOB WAS AT PERTH AIRPORT REMOVING PARTS OF THE RUNWAY.
SKU: DF180301WGAvailable: 1
Add to Quote -
$6,500.00 Plus GST4080mm wide push blade with bolt on edge, suit excavator, 120mm pins, 470mm ibe and 585mm cp to cpRead More4080mm wide push blade with bolt on edge, suit excavator, 120mm pins, 470mm ibe and 585mm cp to cpSKU: CAPE220629
Available: 1
Add to Quote -
$5,000.00 Plus GST3590mm wide push blade to suit excavator, no head bracket fittedRead More3590mm wide push blade to suit excavator, no head bracket fittedSKU: CAPE220965
Available: 1
Add to Quote -
$2,500.00 Plus GSTCustom made 440mm wide rubber scoop to suit excavator, 40mm pins, 160mm ibe and 340mm cp to cpRead MoreCustom made 440mm wide rubber scoop to suit excavator, 40mm pins, 160mm ibe and 340mm cp to cpSKU: CAPE240449
Available: 1
Add to Quote -
$250.00 – $1,250.00 Plus GST1200mm diameter auger bit 100mm x 100mm connection end 1800mm total lengthRead More
- 1200mm diameter auger bit
- 100mm x 100mm connection end
- 1800mm total length
SKU: SG240101Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GST1300mm WIDE AUGER ATTACHMENT APPROX 2000mm TOTAL LENGTH 100mm x 100mm CONNECTION BITRead More
- 1300mm WIDE AUGER ATTACHMENT
- APPROX 2000mm TOTAL LENGTH
- 100mm x 100mm CONNECTION BIT
SKU: SG170914Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GST1200mm WIDE AUGER BIT APPROX 1700mm LONG 75/75mm CONNECTION BITRead More
- 1200mm WIDE AUGER BIT
- APPROX 1700mm LONG
- 75/75mm CONNECTION BIT
SKU: SG170913Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU182000AUGER-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU182000AUGER-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU181500AUGER-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$250.00 – $1,250.00 Plus GSTSKU: AU181500AUGER-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD30-7, Auger Drive suit 20/30T excavator 100/100mm drive various head brackets to suit Flow rate 230L/m Max Pressure 240 Bar.Read More
- DIGGA PD30-7, Auger Drive
- suit 20/30T excavator
- 100/100mm drive
- various head brackets to suit
- Flow rate 230L/m Max Pressure 240 Bar.
SKU: SG220402Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE SUIT 20/50T EXCAVATOR 100/100mm DRIVE Flow rate 230L/m Max Pressure 240 Bar.Read More
- DIGGA PD50-7 HYD AUGER DRIVE
- SUIT 20/50T EXCAVATOR
- 100/100mm DRIVE
- Flow rate 230L/m
- Max Pressure 240 Bar.
SKU: SG201105Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE SUIT 20/50T EXCAVATOR 100/100mm DRIVE Flow rate 230L/m Max Pressure 240 BarRead More
- DIGGA PD50-7 HYD AUGER DRIVE
- SUIT 20/50T EXCAVATOR
- 100/100mm DRIVE
- Flow rate 230L/m
- Max Pressure 240 Bar
SKU: SG190703Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE SUIT 20/50T EXCAVATOR 75/75mm DRIVE HAVE VARIOUS HEAD BRACKETS TO SUIT Flow rate 230L/m Max Pressure 240 Bar.Read More
- DIGGA PD50-7 HYD AUGER DRIVE
- SUIT 20/50T EXCAVATOR
- 75/75mm DRIVE
- HAVE VARIOUS HEAD BRACKETS TO SUIT
- Flow rate 230L/m
- Max Pressure 240 Bar.
SKU: SG170909Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$220.00 – $1,100.00 Plus GSTDIGGA PD50-7 HYD AUGER DRIVE TO SUIT 20/50T EXCAVATOR 100/100mm DRIVE HAVE VARIOUS HEAD BRACKETS TO SUIT Flow rate 230L/m, Max Pressure 240 Bar.Read More
- DIGGA PD50-7 HYD AUGER DRIVE TO SUIT 20/50T EXCAVATOR
- 100/100mm DRIVE
- HAVE VARIOUS HEAD BRACKETS TO SUIT
- Flow rate 230L/m,
- Max Pressure 240 Bar.
SKU: SG160103Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD8 auger drive to suit 5/10T excavator 75/75mm drive Various head brackets to suit Flow Rate 114L/m, Max pressure 240 Bar Has 100mm connect...Read More
- Digga PD8 auger drive to suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow Rate 114L/m, Max pressure 240 Bar
- Has 100mm connect end
SKU: SG230615Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD15 auger drive 10/20T excavator 75/75mm drive Various head brackets to suit Flow 230L/m max pressure 240 BarRead More
- Digga PD15 auger drive
- 10/20T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow 230L/m
- max pressure 240 Bar
SKU: SG230301Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD6 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suit. Flow Rate 114L/m Max pressure 240 BarRead More
- Digga PD6 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit.
- Flow Rate 114L/m
- Max pressure 240 Bar
SKU: SG230201Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD18-5 auger drive suit 10/20T excavator, 75mm x 75mm drive Various head brackets to suit max flow 230 LPM max pressure 240 BARRead More
- Digga PD18-5 auger drive
- suit 10/20T excavator,
- 75mm x 75mm drive
- Various head brackets to suit
- max flow 230 LPM
- max pressure 240 BAR
SKU: SG221203Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD15-5 auger drive suit 10/20T excavator 75/75mm drive Various head brackets to suit Flow Rate 230L/m Max pressure 240 BarRead More
- Digga PD15-5 auger drive
- suit 10/20T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow Rate 230L/m
- Max pressure 240 Bar
SKU: SG210508Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD8-5 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suitRead More
- Digga PD8-5 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
SKU: SG200210Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD8-5 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suitRead More
- Digga PD8-5 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
SKU: SG200202Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD18-5 auger drive suit 10/20T excavator 75/75mm drive Various head brackets to suit Flow 230L/m max pressure 240 BarRead More
- Digga PD18-5 auger drive
- suit 10/20T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow 230L/m
- max pressure 240 Bar
SKU: SG190705Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTDigga PD6 auger drive suit 5/10T excavator 75/75mm drive Various head brackets to suit Flow Rate 114L/m Max pressure 240 BarRead More
- Digga PD6 auger drive
- suit 5/10T excavator
- 75/75mm drive
- Various head brackets to suit
- Flow Rate 114L/m
- Max pressure 240 Bar
SKU: SG190504GSAvailable: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTAuger Drive to suit 5/10T Excavators Has 75x75 drive Have various head brackets to suitRead More
- Auger Drive to suit 5/10T Excavators
- Has 75x75 drive
- Have various head brackets to suit
SKU: SG170907Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTAUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE SUIT 10/15T EXCAVATOR 75/75mm DriveRead More
- AUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE
- SUIT 10/15T EXCAVATOR
- 75/75mm Drive
SKU: SG140303Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$200.00 – $1,000.00 Plus GSTAUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE SUIT 10/15T EXCAVATOR 75mm DriveRead More
- AUGER TORQUE 15000max EARTH DRILL HYD AUGER DRIVE
- SUIT 10/15T EXCAVATOR
- 75mm Drive
SKU: SG140302Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$800.00 Plus GSTPush Blade 950mm wide with 90mm pin, 305mm ibeRead MorePush Blade 950mm wide with 90mm pin, 305mm ibeSKU: SB220602
Available: 1
Add to Quote -
$750.00 Plus GSTBlick power push and associated inserts Hydraulic pipe pusher to suit excavator various head brackets to suit 13T up to 30T Various dies, 160, 215...Read More
- Blick power push and associated inserts
- Hydraulic pipe pusher to suit excavator
- various head brackets to suit 13T up to 30T
- Various dies, 160, 215 , 280, & 315mm
SKU: SB221220Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GST950mm wide auger bit 75mm x 75mm connection end total length 1200mmRead More
- 950mm wide auger bit
- 75mm x 75mm connection end
- total length 1200mm
SKU: SG230616Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTDigga PD4HF-5 High flow auger drive suit 5-10 Tonne excavator 75mm x 75mm connection end various head brackets to suit Max flow rate 230 L/mRead More
- Digga PD4HF-5 High flow auger drive
- suit 5-10 Tonne excavator
- 75mm x 75mm connection end
- various head brackets to suit
- Max flow rate 230 L/m
SKU: SG230208Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTAUGERTORQUE 4500MAX EARTH DRILL HYD AUGER DRIVE SUIT 2-5T EXCAVATOR 65mm DriveRead More
- AUGERTORQUE 4500MAX EARTH DRILL HYD AUGER DRIVE
- SUIT 2-5T EXCAVATOR
- 65mm Drive
SKU: SG210507Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GST600mm wide rock auger bit 2100mm length 100mm x 100mm connection bitRead More
- 600mm wide rock auger bit
- 2100mm length
- 100mm x 100mm connection bit
SKU: SG190704Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page -
$150.00 – $750.00 Plus GSTManitou telehandler Head bracket mount for augerRead More
Manitou telehandler Head bracket mount for auger
SKU: SG190504Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
Showing 1–36 of 162 resultsSorted by price: high to low