Shop

Showing 1–36 of 61 resultsSorted by price: high to low

Prime Drilling PD 330/170-C RP
2013 Prime Drilling PD 330/170-C RP directional drill Track mounted rig with onboard power pack for easy site set-up HYD Drilling power is supplied by...
Read More
2013 Prime Drilling PD 330/170-C RP directional drill Track mounted rig with onboard power pack for easy site set-up HYD Drilling power is supplied by 2 x 20ft containerized CAT C18 diesel engines 470KW Power Pac 1 DCG715 9500 hours Power Pac 2 DCG717 9400 hours Rig DCG709 are 4785 hours 20 ft control cabin, Driller cab and steering /store room setup No rods Recent rotary drive gear box rebuilt with new bearings and hyd motor replacements , Located Western Australia call for more info
$670,000.00 Plus GST
SKU: DCG717
Available: 1
Add to Quote
Centre Edge 45mm suits CAT D9 N, R, T SU
Type: Caterpillar-style bolt-on heavy-duty center cutting edge Application: D9 Caterpillar Bulldozer Design: Double-beveled reversible bucket cutting edge Thickness: 1.75 inches (44.45 mm) Width: 13 inches...
Read More
- Type: Caterpillar-style bolt-on heavy-duty center cutting edge
- Application: D9 Caterpillar Bulldozer
- Design: Double-beveled reversible bucket cutting edge
- Thickness: 1.75 inches (44.45 mm)
- Width: 13 inches (330.2 mm)
- Length: 70.375 inches (1,787.53 mm)
- Fasteners Required:
  
  Twelve 1 x 3.5 inch (25.4 x 88.9 mm) plow bolts
  
  Twelve 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  6 inches (152.4 mm) from center to center
  
  2.188 inches (55.58 mm) from the edge of the cutting edge to the center of the first hole
  
  9W-7043
$750.00 Plus GST
SKU: 9W7043
Available: 2
Add to Quote
Centre Edge 45mm suits CAT D10 N, R, T SU
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick,...
Read More
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick, 16"wide and 39.125"in length. It takes 6 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 6 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 6"from center to center of the bolt holes, and 4.563"when measured from the edge of the bucket cutting edge to the center of the first hole. 9W-6656
$550.00 Plus GST
SKU: 9W6656
Available: 4
Add to Quote
Centre Edge 35mm suits CAT 980 F G H
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick,...
Read More
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 16 inches (406 mm) wide, and 57 inches (1448 mm) long, requiring 3 plow bolts sized 1 1/4 x 4 1/2 inches (31.75 mm x 114.3 mm) and 3 hex nuts sized 1 1/4 inches (31.75 mm); the bolt hole spacing is 19.06 inches (484 mm) center-to-center, and 9.44 inches (240 mm) from the edge of the cutting edge to the center of the first hole.
$550.00 Plus GST
SKU: 1099212
Available: 2
Add to Quote
Centre Edge 35mm D8 N, R, T, D9 L
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches...
Read More
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 53.25 inches (1353 mm) long, requiring 9 plow bolts sized 1 x 3 1/4 inches (25.4 mm x 82.55 mm) and 9 hex nuts sized 1 inch (25.4 mm); the bolt hole spacing is 6 inches (152.4 mm) center-to-center, and 2.63 inches (66.8 mm) from the edge of the cutting edge to the center of the first hole.
$520.00 Plus GST
SKU: 7T9126
Available: 7
Add to Quote
Centre Edge 35mm suits CAT D10 N, R, T SU
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16...
Read More
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16 inches (406.4 mm) wide, and 39.125 inches (993.18 mm) in length. It requires six 1 1/4 x 4 1/4 inch (31.75 x 107.95 mm) plow bolts and six 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 6 inches (152.4 mm) from center to center and 4.563 inches (115.98 mm) from the edge of the bucket cutting edge to the center of the first hole. 9W-6609
$440.00 Plus GST
SKU: 9W6609
Available: 1
Add to Quote
End Bit Hot Cup 50mm RH suits CAT D8 L D9 G H N R T 844
Type: Caterpillar-style bolt-on end bit Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 2 inches (50.8 mm) Width: 16 inches (406.4 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 2 inches (50.8 mm)
  
  Width: 16 inches (406.4 mm)
  
  Length: 24 inches (609.6 mm)
- Fasteners Required:
  
  Seven 1 x 3 1/4 inch (25.4 x 82.55 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.56 inches (90.42 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4197
$350.00 Plus GST
SKU: 8E4197
Available: 1
Add to Quote
Half Arrow Segment 50mm suits CAT 980 F, G, H, 988 B, F, 844 J, K
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4"...
Read More
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4" hex nuts; Use Item #9W5734NRC 116-7460
$295.00 Plus GST
SKU: 1167460
Available: 7
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4194
$280.00 Plus GST
SKU: 8E4194
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4193
8E-4193
$250.00 Plus GST
SKU: 8E4193
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8287
$250.00 Plus GST
SKU: 3G8287
Available: 1
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8288
$250.00 Plus GST
SKU: 3G8288
Available: 1
Add to Quote
End Edge 40mm suits CAT 980 B, C, F, G, H, 988 B, F, G, H
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28...
Read More
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28 mm) thick, 10.375 inches (263.53 mm) wide, and 22 inches (558.8 mm) in length. It requires three 1 1/4 x 4 1/2 inch (31.75 x 114.3 mm) plow bolts and three 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 3.13 inches (79.5 mm) from center to center and 7.88 inches (200.15 mm) from the edge of the bucket cutting edge to the center of the first hole. 1U-0761
$220.00 Plus GST
SKU: 1U0761
Available: 3
Add to Quote
End Edge 35mm suits CAT D8 N, R, T, D9 N, R, T, 844
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5...
Read More
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5 inches (800 mm) long, requiring 5 plow bolts sized 1 inch x 3 inches (25.4 mm x 76.2 mm) and 5 matching hex nuts; the bolt hole spacing is 6 inches (152.4 mm) from center to center, with the first hole positioned 2.875 inches (73 mm) from the edge.
$220.00 Plus GST
SKU: 7T9125
Available: 8
Add to Quote
Sale!

CAT style Router Bit Heavy Duty suits 630 D, C, D, E, G, 631 D, C, D, E, G, 633, D, E 637 D, C, D, E, G, 639 D, E, 650 B, 651 B, E, F 657 B, E, F, 660 B, 666 B
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5...
Read More
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5 - 1" X 3" plow bolts and 5 - 1" hex nuts; the bolt hole spacing is 5.25" from the edge to the center of the 1st hole, 2.5" from 1st to 2nd hole, 3.5" from the 2nd to 3rd hole, 3.5" from the 3rd to 4th hole, 2.5" from the 4th to 5th hole and 5.25" from the 5th hole to the edge; this router bit is 9.5" wide and 22" long
Original price was: $230.00.Current price is: $199.00. Plus GST
SKU: 7J3023
Available: 6
Add to Quote
CAT style J550 Rock Chisel Tooth
Caterpillar style rock chisel bucket tooth for a J550 series; takes a 1U1558 and an 8E5559 sleeved retainer; Use Item #1U3552RC
Read More
Caterpillar style rock chisel bucket tooth for a J550 series; takes a 1U1558 and an 8E5559 sleeved retainer; Use Item #1U3552RC
$150.00 Plus GST
SKU: 9W8552RC
Available: 24
Add to Quote
V Series Twin Tiger Tooth
V series twin tiger, bucket tooth for a 51 series, takes a V51PN flex pin
Read More
V series twin tiger, bucket tooth for a 51 series, takes a V51PN flex pin
$150.00 Plus GST
SKU: V51TVY
Available: 7
Add to Quote
V Series single tiger bucket tooth
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
Read More
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
$150.00 Plus GST
SKU: V51VY
Available: 5
Add to Quote
SOLD OUT _ More Stock Arriving Soon

Edge Segment 30mm suits CAT 980 F G H1099019
Caterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875"thick, 14.1719"wide and...
Read More
Caterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875"thick, 14.1719"wide and 12.5"in length. It takes 2 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 2 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 7.28"from center to center of the bolt holes, and 2.61"when measured from the edge of the bucket cutting edge to the center of the first hole.
$150.00 Plus GST
SKU: 1099019
Out of stock
Add to Quote
Sale!

V Series Penetration Tooth
V SERIES TWIST TOOTH rock chisel for a 51 series, takes a V51PN flex pin.
Read More
V SERIES TWIST TOOTH rock chisel for a 51 series, takes a V51PN flex pin.
Original price was: $150.00.Current price is: $125.00. Plus GST
SKU: V51SDX
Available: 15
Add to Quote
Doosan style DX400 Chisel Tooth suits DX400, DX420 (K1004145, K9005353)
$120.00 Plus GST
SKU: 2713-1236
Available: 3
Add to Quote
AUJ550TIGER
Caterpillar style twin tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer. - P/N 1U3552WTL
Read More
Caterpillar style twin tiger long bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer.

- P/N 1U3552WTL
$120.00 Plus GST
SKU: AUJ550TIGER
Available: 6
Add to Quote
AUJ550-40TBKTTOOTH
J550 Tooth, p/n 9W8552V. xref no 159-0559. Price per each. Pin and Retainer also available for purchase. Caterpillar style SYL version bucket tooth for a...
Read More
J550 Tooth, p/n 9W8552V. xref no 159-0559. Price per each. Pin and Retainer also available for purchase.

Caterpillar style SYL version bucket tooth for a J550 series; takes a 1U1558 pin and an 8E5559 sleeved retainer.

$110.00 Plus GST
SKU: AUJ550-40TBKTTOOTH
Available: 23
Add to Quote
SOLD OUT _ More Stock Arriving Soon

AU Buckets Double Bevel Universal Edge – Bolt On to suit 45mm Mud Bucket
150mm x 16mm x 1240mm with 5/8" Plow Bolt Holes - 8 Holes total with 6" Spacing Boron Steel - 450 Grade Heat Treated
Read More
150mm x 16mm x 1240mm with 5/8" Plow Bolt Holes - 8 Holes total with 6" Spacing Boron Steel - 450 Grade Heat Treated
$100.00 Plus GST
SKU: AU150X16X1240-58
Out of stock
Add to Quote
ESC style V39 Loader Tooth
V series abrasion penetration bucket tooth for a 39 series, takes a V39PN flex pin.
Read More
V series abrasion penetration bucket tooth for a 39 series, takes a V39PN flex pin.
$100.00 Plus GST
SKU: V39AD
Available: 5
Add to Quote
CAT style K90 General Duty Tooth
Caterpillar style standard, dirt bucket tooth for a K90 series; takes a 220-9090 pin. 475-5484
Read More
Caterpillar style standard, dirt bucket tooth for a K90 series; takes a 220-9090 pin. 475-5484
$99.00 Plus GST
SKU: 2209099
Available: 7
Add to Quote
CAT style K90 Extra Duty Tooth
4755480
Read More
4755480
$95.00 Plus GST
SKU: 2209091
Available: 8
Add to Quote
SOLD OUT _ More Stock Arriving Soon

AU90TOOTHJ450
Mixed Brands J450/460 Rock Chisel Tooth, p/n 9W8452RC.. Price per each. Pin and Retainer also available for purchase.
Read More
Mixed Brands J450/460 Rock Chisel Tooth, p/n 9W8452RC.. Price per each. Pin and Retainer also available for purchase.
$95.00 Plus GST
SKU: AU90TOOTHJ450
Out of stock
Add to Quote
CAT style J460 Heavy Duty Tooth
Caterpillar style heavy duty bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an...
Read More
Caterpillar style heavy duty bucket tooth for a J450 series; takes a 1U1458 pin and an 8E6359 sleeved retainer (or an 8E0468 pin and an 8E8469 sleeved retainer).
$90.00 Plus GST
SKU: 9N4452
Available: 14
Add to Quote
Volvo Style Chisel Tooth
other part number ref: 14522959, 14526510, 14624280
Read More
other part number ref: 14522959, 14526510, 14624280
$85.00 Plus GST
SKU: 65AMRE
Available: 5
Add to Quote
J450 Rock Chisel Tooth
$82.50 Plus GST
SKU: 1U3452RC
Available: 9
Add to Quote
SOLD OUT _ More Stock Arriving Soon

AUJ450TIGER
Caterpillar style twin tiger bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item #1U3452WTL
Read More
Caterpillar style twin tiger bucket tooth for a J450 series; takes an 8E0468 pin and an 8E8469 sleeved retainer; Use Item #1U3452WTL
$80.00 Plus GST
SKU: AUJ450TIGER
Out of stock
Add to Quote
ESC style V39 Penetration Tooth
V rock chisel bucket tooth for a 39 series, takes a V39PN flex pin.
Read More
V rock chisel bucket tooth for a 39 series, takes a V39PN flex pin.
$75.00 Plus GST
SKU: V39SDX
Available: 10
Add to Quote
Tooth Point – Rock Penetration
The HT142RP is a bucket point designed for Hitachi excavators, serving as a replaceable tip that attaches to the bucket's edge to enhance digging efficiency...
Read More
The HT142RP is a bucket point designed for Hitachi excavators, serving as a replaceable tip that attaches to the bucket's edge to enhance digging efficiency and protect the bucket from wear. This component is categorized as a "Long" type point, indicating its suitability for applications requiring extended reach or penetration. Key Specifications: Product Code: HT142RP Type: Long Compatibility: Designed for specific Hitachi excavator buckets
$70.00 Plus GST
SKU: HT142RP
Available: 9
Add to Quote
ESC style V33 Loader Tooth
V series style abrasion penetration bucket tooth for a 33 series, takes a V33PN flex pin.
Read More
V series style abrasion penetration bucket tooth for a 33 series, takes a V33PN flex pin.
$69.00 Plus GST
SKU: V33AD
Add to Quote
AU65-80TOOTHJ350
Caterpillar style rock chisel bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer. Price per each other cross ref...
Read More
Caterpillar style rock chisel bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer. Price per each other cross ref no 539-5650 / 168-1359 / 1U3352RC

Caterpillar style rock chisel bucket tooth for a J350 series; takes a 9J2358 pin and an 8E6359 sleeved retainer.
$60.00 Plus GST
SKU: AU65-80TOOTHJ350
Available: 28
Add to Quote