Shop

Showing all 16 resultsSorted by price: high to low

2014 GENIE GS1932 EWP AND TRAILER
2014 GENIE GS1932 COMPACT ELECTRIC/HYDRAULIC SCISSOR LIFT – SG240904 Compliance (YOM): 17/02/2014 Hours: 111 hours showing on meter Serial Number: GS3014C-14792 Make/Model: Genie GS1932 Type:...
Read More
2014 GENIE GS1932 COMPACT ELECTRIC/HYDRAULIC SCISSOR LIFT – SG240904
- Compliance (YOM): 17/02/2014
- Hours: 111 hours showing on meter
- Serial Number: GS3014C-14792
- Make/Model: Genie GS1932
- Type: Electric/hydraulic scissor lift
- Working Height: 7.6m
- Platform height: 5.8m
- Platform Working Load (Capacity): 227kg
- Platform Dimensions: 1640mm x 740mm, 2540mm x 740mm extended
- Extendable Work platform: Yes
- Drive: Battery power electrics / hydraulics
- Wheel drive 4WD or 2WD: 2WD
- Drive Speeds: 2 speeds
- Controls: Joystick & switches electric / hydraulic controls,
- Hydraulic Controls Raise Speeds: 2 speed lift
- Colour (Exterior): Blue
- Tyre Size: 30cm x 11cm x 20 cm Solid: Yes, non-marking
- Tie Down points: Yes
- Fork tyne pockets for lifting (Transport): Yes
- Battery Voltage: 24 volts
- Charger: Yes, off 240 volt mains
- Service History: Annual service/inspection completed; 4 x new batteries fitted
- Service / Repairs Required: 10-year inspection is due
2016 TANDEM AXLE PLANT TRAILER – STR240901
- Make / Model: Trailer Factory (Aust) HD
- Rego number: 1TYG010 Expires 20/12/2024
- Compliance (YOM): 05/2016
- VIN: 6FL112233G1000211
- Axle Configuration: Tandem
- Suspension Type: 4 x leaf springs
- Brake Type Drum/ Disc: Disc front axle, hydraulic master cyl and brake callipers
- Tare: 400kg ATM: 2000kg
- Tyre Size: 165R/13 LT
- Tow Hich: Make/ Type/ Size: 50mm ball
- Deck dimensions L W cm: L210cm x W105cm
- Transport Dimensions L H W cm: L395cm x H230cm x W158cm
- Ramp Operation Hyd /Manual/Electric: Manual
- Lights Type / Voltage: LED
- Service History: Just serviced, new wheel bearings
- Features: Trailer design specifically for the Genie EWP
- Fitted Accessories: Spare wheel, load restraint
$18,500.00 Plus GST
SKU: SG240904
Add to Quote
2012 JLG M4069LE, Large electric scissor lift
2012 JLG M4069LE, Large electric scissor lift , Quick charge Gen Set, 12.19 max working height, platform working load 360kg. extendable work platform. e-stops top...
Read More
2012 JLG M4069LE, Large electric scissor lift , Quick charge Gen Set, 12.19 max working height, platform working load 360kg. extendable work platform. e-stops top and bottom, 404 hours, All terrain tyres, 5300kg.
$17,000.00 Plus GST
SKU: SG221201
Available: 1
Add to Quote
For Hire
4hire Hydraram HMGT1100 Hydraulic Magnet with teeth
HMGT1100 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1100 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
$350.00 – $1,750.00 Plus GST
SKU: HYHMGT1100
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire HMGT1300 Hydraulic Magnet with teeth
HMGT1300 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1300 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
- Flow Rate 100-120L/m Max. Pressure 200Bar Max. Must be operated in Rock Breaker Mode
$350.00 – $1,750.00 Plus GST
SKU: 22HYHMGT1300
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Hydraram HMGT1300 Hydraulic Magnet with teeth
HMGT1300 Hydraulic Magnet with teeth. Suit 26-32T excavator, Various head brackets to suit These Magnets work on the hammerlines of your excavator so they only...
Read More
- HMGT1300 Hydraulic Magnet with teeth.
- Suit 26-32T excavator, Various head brackets to suit
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger
- Flow Rate 100-120L/m Max. Pressure 200Bar Max. Must be operated in Rock Breaker Mode
$350.00 – $1,750.00 Plus GST
SKU: 23HYHMGT1300-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For HireCurrently on Hire
4hire Hydraram HMGT1100 Hydraulic Magnet with teeth
HMGT1100 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1100 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
$350.00 – $1,750.00 Plus GST
SKU: 23HYHMGT1100-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire Hydraram HMGT1100 Hydraulic Magnet with teeth
HMGT1100 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT1100 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
$350.00 – $1,750.00 Plus GST
SKU: 23HYHMGT1100-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4hire HMGT950 Hydraulic Magnet with teeth
HMGT950 Hydraulic Magnet with teeth. These Magnets work on the hammerlines of your excavator so they only required one way flow. These units have an...
Read More
- HMGT950 Hydraulic Magnet with teeth.
- These Magnets work on the hammerlines of your excavator so they only required one way flow.
- These units have an internal hydraulic pump that operates the electromagnet circuit.
- We have various head brackets that bolt on to suit your digger.
$300.00 – $1,500.00 Plus GST
SKU: 23HYHMGT950-2
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Sale

HOOKS – CAT Fusion (914 to 966)
1 Pair of bolt on CAT Fusion hooks,
Read More
1 Pair of bolt on CAT Fusion hooks,
$850.00 Plus GST
SKU: SB240203
Add to Quote
Weld on Volvo L150 ears/hooks
Weld on ears to suit the Volvo L150/L180 loader. Made from 50mm plate. Sold as one pair.
Read More
Weld on ears to suit the Volvo L150/L180 loader. Made from 50mm plate. Sold as one pair.
$850.00 Plus GST
SKU: AUHOOKSVOLVOL150
Available: 8
Add to Quote
Weld on CAT Fusion ears/hooks
WELD ON CAT Fusion EARS. SOLD AS PAIRS
Read More
WELD ON CAT Fusion EARS. SOLD AS PAIRS
$850.00 Plus GST
SKU: AUHOOKSCATFU
Available: 11
Add to Quote
For Sale

HOOKS – CAT IT (Older 914 to 928)
1 Pair of bolt on CAT IT Hooks,
Read More
1 Pair of bolt on CAT IT Hooks,
$650.00 Plus GST
SKU: SB240205
Add to Quote
Weld on CAT IT38 ears/hooks
Weld on ears to suit the CAT IT38 loader. Made from 50mm plate. Sold as one pair.
Read More
Weld on ears to suit the CAT IT38 loader. Made from 50mm plate. Sold as one pair.
$650.00 Plus GST
SKU: AUHOOKSCATIT38
Available: 22
Add to Quote
SOLD OUT _ More Stock Arriving Soon

Weld on Euro ears/hooks
WELD ON Euro/Volvo EARS. SUIT VOLVO L60F TO L120F. ALSO SUIT KOMATSU, JOHN DEERE, HYUNDAI AND MANY OTHER LOADERS WITH EURO HITCHES. SOLD AS PAIRS
Read More
WELD ON Euro/Volvo EARS. SUIT VOLVO L60F TO L120F. ALSO SUIT KOMATSU, JOHN DEERE, HYUNDAI AND MANY OTHER LOADERS WITH EURO HITCHES. SOLD AS PAIRS
$650.00 Plus GST
SKU: AUHOOKSEURO
Out of stock
Add to Quote
Weld on CAT IT ears/hooks
WELD ON CAT IT EARS. SOLD AS PAIRS
Read More
WELD ON CAT IT EARS. SOLD AS PAIRS
$650.00 Plus GST
SKU: AUHOOKSCATIT
Available: 3
Add to Quote
For Hire

4Hire CAT IT38 to EURO adaptor plate
CAT IT38 TO EURO adaptor plate, suits loaders with CAT IT38 pick ups, converts your hitch to Euro/ Volvo pick up's
Read More
CAT IT38 TO EURO adaptor plate, suits loaders with CAT IT38 pick ups, converts your hitch to Euro/ Volvo pick up's
$75.00 Plus GST
SKU: AUADAPTORCAT38-EURO
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page