Shop

Showing 1–36 of 42 resultsSorted by price: high to low

2010 Olympian GEH275, 250 kVA 200kW Genset
2010 OLYMPIAN GEH275, 250 kVA 200kW genset 3 phase synchronous generator Perkins GCB330A 8.7 litre 6-cylinder turbo diesel 24 volt start, sound attenuated enclosed cabinet...
Read More
- 2010 OLYMPIAN GEH275, 250 kVA 200kW genset
- 3 phase synchronous generator
- Perkins GCB330A 8.7 litre 6-cylinder turbo diesel
- 24 volt start, sound attenuated enclosed cabinet
- 700 litre non bunded fuel tank
- E stops, battery isolator
- lifting point
- gen set not load tested or electrical tested
- 8849 hours.
$35,000.00 Plus GST
SKU: DCG261 CAPE
Available: 1
Add to Quote
2010 Cummins C200D2R, 200 kVA 160kW Genset
2010 Cummins C200D2R, 200 kVA 160kW Genset, 415 volt, Cummins QSB7-G5NR3 6 cylinder turbo diesel (QSB6.7), 12 volt start, enclosed sound proof cabinet, 750 litre...
Read More
2010 Cummins C200D2R, 200 kVA 160kW Genset, 415 volt, Cummins QSB7-G5NR3 6 cylinder turbo diesel (QSB6.7), 12 volt start, enclosed sound proof cabinet, 750 litre bunded fuel tank, E stops, battery isolator, lifting points, fork tyne pockets, load tested, electrical tested, serviced, certificates available, runs well, 24135 hours.
$12,500.00 Plus GST
SKU: SG230507
Available: 1
Add to Quote
2018 Pro Power LC150C, 150kVA 120kW Genset
2018 Pro Power LC150C, 150kVA 120kW Genset 415 volt Cummins QSB7-G3NR3 6 cylinder turbo diesel (QSB6.7) 24 volt start enclosed sound proof cabinet 800 litre...
Read More
- 2018 Pro Power LC150C, 150kVA 120kW Genset
- 415 volt
- Cummins QSB7-G3NR3 6 cylinder turbo diesel (QSB6.7)
- 24 volt start
- enclosed sound proof cabinet
- 800 litre bunded fuel tank
- E stops
- battery isolator
- lifting points, fork tyne pockets,
- load tested,
- electrical tested
- serviced
- certificates available
- runs well
- 32965 hours.
$11,500.00 Plus GST
SKU: SG230505
Available: 1
Add to Quote
2011 Cummins C150D2R, 150kVA 120kW Genset
2011 Cummins C150D2R, 150kVA 120kW Genset 415 volt Cummins QSB7-G5NR3 6 cylinder turbo diesel (QSB6.7) 12 volt start enclosed sound proof cabinet, 700 litre bunded...
Read More
- 2011 Cummins C150D2R, 150kVA 120kW Genset
- 415 volt
- Cummins QSB7-G5NR3 6 cylinder turbo diesel (QSB6.7)
- 12 volt start
- enclosed sound proof cabinet,
- 700 litre bunded fuel tank,
- E stops,
- battery isolator,
- lifting points, fork tyne pockets,
- load tested,
- electrical tested,
- serviced,
- certificates available,
- runs well,
- 36112 hours.
- Please note - Earth leakage device not working for 415 volt outlet, 415 volt outlet removed.
$11,250.00 Plus GST
SKU: SG230506
Available: 1
Add to Quote
Lombardini 8.5KVA Generator – 240V
Lombardini 8.5KVA Generator - 240V Lockable Isolators E-Stop Recently Serviced Quarterly Tested and Tagged Brand New Control Module Installed Brand New Battery Installed Mounted in...
Read More
- Lombardini 8.5KVA Generator - 240V
- Lockable Isolators
- E-Stop
- Recently Serviced
- Quarterly Tested and Tagged
- Brand New Control Module Installed
- Brand New Battery Installed
- Mounted in Box Frame
- Standby Kva: 8.5 (36.9A)
- hours showing zero , but has 2250
- Prime Kva: 7.7
- Engine Brand: Lombardini
- Fuel Tank: 26L
- Outlets: 1 x Single Phase , 2 x 15amp, 1 x 32amp outlet
$4,500.00 Plus GST
SKU: GE50
Available: 1
Add to Quote
SINCRO EK2LCA, Genset with Yanmar diesel engine
SINCRO EK2LCA, Genset with Yanmar diesel engine single phase outlets electric start battery isolator 8 kva, 50Hz 190.9 hours in frame on wheels
Read More
- SINCRO EK2LCA, Genset with Yanmar diesel engine
- single phase outlets
- electric start
- battery isolator
- 8 kva, 50Hz
- 190.9 hours
- in frame on wheels
$2,500.00 Plus GST
SKU: SG220521
Available: 1
Add to Quote
Centre Edge 45mm suits CAT D9 N, R, T SU
Type: Caterpillar-style bolt-on heavy-duty center cutting edge Application: D9 Caterpillar Bulldozer Design: Double-beveled reversible bucket cutting edge Thickness: 1.75 inches (44.45 mm) Width: 13 inches...
Read More
- Type: Caterpillar-style bolt-on heavy-duty center cutting edge
- Application: D9 Caterpillar Bulldozer
- Design: Double-beveled reversible bucket cutting edge
- Thickness: 1.75 inches (44.45 mm)
- Width: 13 inches (330.2 mm)
- Length: 70.375 inches (1,787.53 mm)
- Fasteners Required:
  
  Twelve 1 x 3.5 inch (25.4 x 88.9 mm) plow bolts
  
  Twelve 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  6 inches (152.4 mm) from center to center
  
  2.188 inches (55.58 mm) from the edge of the cutting edge to the center of the first hole
  
  9W-7043
$750.00 Plus GST
SKU: 9W7043
Available: 2
Add to Quote
Centre Edge 45mm suits CAT D10 N, R, T SU
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick,...
Read More
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick, 16"wide and 39.125"in length. It takes 6 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 6 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 6"from center to center of the bolt holes, and 4.563"when measured from the edge of the bucket cutting edge to the center of the first hole. 9W-6656
$550.00 Plus GST
SKU: 9W6656
Available: 4
Add to Quote
Centre Edge 35mm suits CAT 980 F G H
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick,...
Read More
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 16 inches (406 mm) wide, and 57 inches (1448 mm) long, requiring 3 plow bolts sized 1 1/4 x 4 1/2 inches (31.75 mm x 114.3 mm) and 3 hex nuts sized 1 1/4 inches (31.75 mm); the bolt hole spacing is 19.06 inches (484 mm) center-to-center, and 9.44 inches (240 mm) from the edge of the cutting edge to the center of the first hole.
$550.00 Plus GST
SKU: 1099212
Available: 2
Add to Quote
Centre Edge 35mm D8 N, R, T, D9 L
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches...
Read More
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 53.25 inches (1353 mm) long, requiring 9 plow bolts sized 1 x 3 1/4 inches (25.4 mm x 82.55 mm) and 9 hex nuts sized 1 inch (25.4 mm); the bolt hole spacing is 6 inches (152.4 mm) center-to-center, and 2.63 inches (66.8 mm) from the edge of the cutting edge to the center of the first hole.
$520.00 Plus GST
SKU: 7T9126
Available: 7
Add to Quote
Centre Edge 35mm suits CAT D10 N, R, T SU
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16...
Read More
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16 inches (406.4 mm) wide, and 39.125 inches (993.18 mm) in length. It requires six 1 1/4 x 4 1/4 inch (31.75 x 107.95 mm) plow bolts and six 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 6 inches (152.4 mm) from center to center and 4.563 inches (115.98 mm) from the edge of the bucket cutting edge to the center of the first hole. 9W-6609
$440.00 Plus GST
SKU: 9W6609
Available: 1
Add to Quote
End Bit Hot Cup 50mm RH suits CAT D8 L D9 G H N R T 844
Type: Caterpillar-style bolt-on end bit Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 2 inches (50.8 mm) Width: 16 inches (406.4 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 2 inches (50.8 mm)
  
  Width: 16 inches (406.4 mm)
  
  Length: 24 inches (609.6 mm)
- Fasteners Required:
  
  Seven 1 x 3 1/4 inch (25.4 x 82.55 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.56 inches (90.42 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4197
$350.00 Plus GST
SKU: 8E4197
Available: 1
Add to Quote
9W8365 Ripper Guard
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$300.00 Plus GST
SKU: 9W8365 Ripper Guard
Available: 10
Add to Quote
Half Arrow Segment 50mm suits CAT 980 F, G, H, 988 B, F, 844 J, K
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4"...
Read More
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4" hex nuts; Use Item #9W5734NRC 116-7460
$295.00 Plus GST
SKU: 1167460
Available: 7
Add to Quote
CAT style D10 Ripper Guard suits 100mm Shank
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers. Also: PR500-SH100
Read More
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers. Also: PR500-SH100
$290.00 Plus GST
SKU: 6Y8960
Available: 2
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4194
$280.00 Plus GST
SKU: 8E4194
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4193
8E-4193
$250.00 Plus GST
SKU: 8E4193
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8287
$250.00 Plus GST
SKU: 3G8287
Available: 1
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8288
$250.00 Plus GST
SKU: 3G8288
Available: 1
Add to Quote
AU80GUARDRIP
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
Read More
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
$250.00 Plus GST
SKU: AU80GUARDRIP
Available: 9
Add to Quote
End Edge 40mm suits CAT 980 B, C, F, G, H, 988 B, F, G, H
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28...
Read More
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28 mm) thick, 10.375 inches (263.53 mm) wide, and 22 inches (558.8 mm) in length. It requires three 1 1/4 x 4 1/2 inch (31.75 x 114.3 mm) plow bolts and three 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 3.13 inches (79.5 mm) from center to center and 7.88 inches (200.15 mm) from the edge of the bucket cutting edge to the center of the first hole. 1U-0761
$220.00 Plus GST
SKU: 1U0761
Available: 3
Add to Quote
End Edge 35mm suits CAT D8 N, R, T, D9 N, R, T, 844
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5...
Read More
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5 inches (800 mm) long, requiring 5 plow bolts sized 1 inch x 3 inches (25.4 mm x 76.2 mm) and 5 matching hex nuts; the bolt hole spacing is 6 inches (152.4 mm) from center to center, with the first hole positioned 2.875 inches (73 mm) from the edge.
$220.00 Plus GST
SKU: 7T9125
Available: 8
Add to Quote
AUTOOTHR500
R500 Series/4T 5502 Ripper Boot. Suits our 30/40/50T size Rippers Price per each. Pin and Retainer also available for purchase.
Read More
R500 Series/4T 5502 Ripper Boot. Suits our 30/40/50T size Rippers Price per each. Pin and Retainer also available for purchase.
$220.00 Plus GST
SKU: AUTOOTHR500
Available: 10
Add to Quote
Sale!

CAT style Router Bit Heavy Duty suits 630 D, C, D, E, G, 631 D, C, D, E, G, 633, D, E 637 D, C, D, E, G, 639 D, E, 650 B, 651 B, E, F 657 B, E, F, 660 B, 666 B
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5...
Read More
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5 - 1" X 3" plow bolts and 5 - 1" hex nuts; the bolt hole spacing is 5.25" from the edge to the center of the 1st hole, 2.5" from 1st to 2nd hole, 3.5" from the 2nd to 3rd hole, 3.5" from the 3rd to 4th hole, 2.5" from the 4th to 5th hole and 5.25" from the 5th hole to the edge; this router bit is 9.5" wide and 22" long
Original price was: $230.00.Current price is: $199.00. Plus GST
SKU: 7J3023
Available: 6
Add to Quote
CAT style D10 Ripper Penetration Intermediate
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
Read More
Caterpillar style ripper bucket tooth for a R500 series; takes a 6Y3909 pin and a 4T4707 retainer.
$195.00 Plus GST
SKU: 4T5502
Available: 10
Add to Quote
V Series single tiger bucket tooth
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
Read More
V Series tiger bucket tooth for a 51 series, takes a V51PN flex pin.
$150.00 Plus GST
SKU: V51VY
Available: 5
Add to Quote
SOLD OUT _ More Stock Arriving Soon

Edge Segment 30mm suits CAT 980 F G H1099019
Caterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875"thick, 14.1719"wide and...
Read More
Caterpillar style bolt on segment for a Caterpillar 980 Front End Loader. This is a double beveled reversible bucket segment that is 1.1875"thick, 14.1719"wide and 12.5"in length. It takes 2 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 2 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 7.28"from center to center of the bolt holes, and 2.61"when measured from the edge of the bucket cutting edge to the center of the first hole.
$150.00 Plus GST
SKU: 1099019
Out of stock
Add to Quote
CAT style D8 & D9 Ripper Centreline Intermediate
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E4749 retainer
Read More
Cat Style Ripper Bucket tooth For a R450 Series ( D8 AND D9 ), takes a 4T2479 or a 6Y3394 pin and a 8E4749 retainer
$130.00 Plus GST
SKU: 9W2452
Available: 3
Add to Quote
R450 Caterpillar Bucket Tooth – D8 / D9
Caterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer.
Read More
Caterpillar style ripper bucket tooth for a R450 series; takes a 4T2479 or a 6Y3394 pin and an 8E4743 sleeved retainer.
$130.00 Plus GST
SKU: 9W2451
Available: 2
Add to Quote
CAT style D8 & D9 Ripper Penetration
Caterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer.
Read More
Caterpillar style ripper bucket tooth for a R450 series; takes a 6Y3394 pin and an 8E5559 sleeved retainer.
$115.00 Plus GST
SKU: 4T5452
Add to Quote
AU80TOOTHD85
Ripper boots, suit D85, D135, D150, D155. P/n 9W8452 or 175-78-31230 different brands. To suit 13-20t rippers and some buckets
Read More
Ripper boots, suit D85, D135, D150, D155. P/n 9W8452 or 175-78-31230 different brands. To suit 13-20t rippers and some buckets
$110.00 Plus GST
SKU: AU80TOOTHD85
Available: 10
Add to Quote
SOLD OUT _ More Stock Arriving Soon

AU Buckets Double Bevel Universal Edge – Bolt On to suit 45mm Mud Bucket
150mm x 16mm x 1240mm with 5/8" Plow Bolt Holes - 8 Holes total with 6" Spacing Boron Steel - 450 Grade Heat Treated
Read More
150mm x 16mm x 1240mm with 5/8" Plow Bolt Holes - 8 Holes total with 6" Spacing Boron Steel - 450 Grade Heat Treated
$100.00 Plus GST
SKU: AU150X16X1240-58
Out of stock
Add to Quote
CAT style D6 & D7 Ripper Penetration
Caterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer.
Read More
Caterpillar style ripper bucket tooth for a R350 series; takes a 9J2358 pin and a 1U2405 retainer.
$85.00 Plus GST
SKU: 6Y0359
Available: 36
Add to Quote
Tooth Point – Rock Penetration
The HT142RP is a bucket point designed for Hitachi excavators, serving as a replaceable tip that attaches to the bucket's edge to enhance digging efficiency...
Read More
The HT142RP is a bucket point designed for Hitachi excavators, serving as a replaceable tip that attaches to the bucket's edge to enhance digging efficiency and protect the bucket from wear. This component is categorized as a "Long" type point, indicating its suitability for applications requiring extended reach or penetration. Key Specifications: Product Code: HT142RP Type: Long Compatibility: Designed for specific Hitachi excavator buckets
$70.00 Plus GST
SKU: HT142RP
Available: 9
Add to Quote
CAT style Grader Scarifier Shank Universal FORGED
Caterpillar style scarifier shank for a motor grader; takes a 5K-1459 pin and a 5K-1458 bushing; the dimensions are 1" in height, 3" in width...
Read More
Caterpillar style scarifier shank for a motor grader; takes a 5K-1459 pin and a 5K-1458 bushing; the dimensions are 1" in height, 3" in width and 17 1/4" in length.
$55.00 Plus GST
SKU: 9F5124
Available: 52
Add to Quote
Sale!

CAT style D4 Ripper Penetration
Caterpillar style ripper bucket tooth for a R300 / D4 series; takes a 9J6583 pin and a 8E6359 retainer.
Read More
Caterpillar style ripper bucket tooth for a R300 / D4 series; takes a 9J6583 pin and a 8E6359 retainer.
Original price was: $55.00.Current price is: $45.00. Plus GST
SKU: 6Y0309
Available: 61
Add to Quote