Shop

Showing 1–36 of 122 resultsSorted by price: high to low

2011 JOHN DEERE 672G 6 wd articulated grader
2011 JOHN DEERE 672G 6 wd articulated grader John Deere 9 litre 6 cylinder turbo diesel engine Interim Tier IV/Stage III B,195 hp 8 gears...
Read More
- 2011 JOHN DEERE 672G 6 wd articulated grader
- John Deere 9 litre 6 cylinder turbo diesel engine
- Interim Tier IV/Stage III B,195 hp
- 8 gears forward/reverse
- standard controls
- 12 ft. blade
- rear rippers
- ROPS, aircon cab
- emergency stops, battery isolator
- auto lube system
- 8970 hours
- 18395 kg
- good condition
$200,000.00 Plus GST
SKU: GR29_RJV
Available: 1
Add to Quote
For Sale

3 stage jib Euro lifting range 500/3500kg
AU 3 stage jib to suit loader with EURO pickups, extension from 2250mm to 4940mm, lifting range 500/3500kg, comes with rated hook & shackle
Read More
AU 3 stage jib to suit loader with EURO pickups, extension from 2250mm to 4940mm, lifting range 500/3500kg, comes with rated hook & shackle
$7,500.00 Plus GST
SKU: JIBMANEURO
Available: 6
Add to Quote
For Sale

3 stage jib CAT IT lifting range 500/3500kg
AU 3 stage jib to suit loader with CAT IT pickups, extension from 2250mm to 4940mm, lifting range 500/3500kg, comes with rated hook & shackle
Read More
AU 3 stage jib to suit loader with CAT IT pickups, extension from 2250mm to 4940mm, lifting range 500/3500kg, comes with rated hook & shackle
$7,500.00 Plus GST
SKU: JIBMANCATIT
Available: 5
Add to Quote
For Sale

3 stage jib CAT Fusion lifting range 500/3500kg
AU 3 stage jib to suit loader with CAT Fusion pickups, extension from 2250mm to 4940mm, lifting range 500/3500kg, comes with rated hook and shackle
Read More
AU 3 stage jib to suit loader with CAT Fusion pickups, extension from 2250mm to 4940mm, lifting range 500/3500kg, comes with rated hook and shackle
$7,500.00 Plus GST
SKU: JIBMANCATFU
Available: 6
Add to Quote
For Sale
2 STAGE JIB QMW INDUSTRIES
QMW INDUSTRIES 2100mm TOTAL LENGTH CLOSED 2 STAGE JIB, 60mm PIN HOLES, 1020mm CBP TO CBP, 860mm CTP TO CBP
Read More
- QMW INDUSTRIES 2100mm TOTAL LENGTH CLOSED
- 2 STAGE JIB,
- 60mm PIN HOLES, 1020mm CBP TO CBP, 860mm CTP TO CBP
$4,500.00 Plus GST
SKU: SB170310
Available: 1
Add to Quote
FOR SALE
2 Stage Jib for loader CAT IT pickups
2 STAGE JIB , Approximate 2400mm total length closed Suit loader CAT IT pickups 50mm pin holes 565mm CBP TO CBP, 510mm CTP TO CB
Read More
- 2 STAGE JIB
- , Approximate 2400mm total length closed
- Suit loader CAT IT pickups
- 50mm pin holes
- 565mm CBP TO CBP, 510mm CTP TO CB
$4,000.00 Plus GST
SKU: SB180203GS
Available: 1
Add to Quote
For Sale

3 STAGE JIB to fit volvo pickup
PROJECT INDUSTRIES 3 STAGE JIB SUIT CAT 966F LOADER, 60mm PIN HOLES, 1015mm CBP TO CBP, 860mm CTP TO CBP , TO FIT VOLVO L120
Read More
PROJECT INDUSTRIES 3 STAGE JIB SUIT CAT 966F LOADER, 60mm PIN HOLES, 1015mm CBP TO CBP, 860mm CTP TO CBP , TO FIT VOLVO L120
$3,500.00 Plus GST
SKU: SB160729
Available: 1
Add to Quote
For Sale

3 Stage Jib to suit Loader with Euro/Volvo hitch
3 Stage jib to suit loader with Euro/Volvo hitch, WLL 3000kg, 1560mm total length closed, 2200mm total length open
Read More
3 Stage jib to suit loader with Euro/Volvo hitch, WLL 3000kg, 1560mm total length closed, 2200mm total length open
$3,500.00 Plus GST
SKU: CAPE240451
Add to Quote
For Sale
Contatore Engineering 3 stage jib
2011 Contatore Engineering 3 stage jib Suit loader with Contatore Engineering hitch WLL 3T, lifting range 1900mm to 3500mm
Read More
- 2011 Contatore Engineering 3 stage jib
- Suit loader with Contatore Engineering hitch
- WLL 3T, lifting range 1900mm to 3500mm
$3,000.00 Plus GST
SKU: SG240907
Available: 1
Add to Quote
For Sale

2000mm long 2 stage lifting jib to suit loader with CAT IT pickups
2000mm long 2 stage lifting jib to suit loader with CAT IT pickups
Read More
2000mm long 2 stage lifting jib to suit loader with CAT IT pickups
$3,000.00 Plus GST
SKU: SB220810
Available: 1
Add to Quote
Centre Edge 45mm suits CAT D9 N, R, T SU
Type: Caterpillar-style bolt-on heavy-duty center cutting edge Application: D9 Caterpillar Bulldozer Design: Double-beveled reversible bucket cutting edge Thickness: 1.75 inches (44.45 mm) Width: 13 inches...
Read More
- Type: Caterpillar-style bolt-on heavy-duty center cutting edge
- Application: D9 Caterpillar Bulldozer
- Design: Double-beveled reversible bucket cutting edge
- Thickness: 1.75 inches (44.45 mm)
- Width: 13 inches (330.2 mm)
- Length: 70.375 inches (1,787.53 mm)
- Fasteners Required:
  
  Twelve 1 x 3.5 inch (25.4 x 88.9 mm) plow bolts
  
  Twelve 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  6 inches (152.4 mm) from center to center
  
  2.188 inches (55.58 mm) from the edge of the cutting edge to the center of the first hole
  
  9W-7043
$750.00 Plus GST
SKU: 9W7043
Available: 2
Add to Quote
Hydraulic cylinder to suit AU hydraulic 3 stage jib – AU17HYDJIBCYL
Hydraulic cylinder to suit AU hydraulic 3 stage jib. P/n CYL-JIB
Read More
Hydraulic cylinder to suit AU hydraulic 3 stage jib. P/n CYL-JIB
$750.00 Plus GST
SKU: AU17HYDJIBCYL
Available: 1
Add to Quote
Centre Edge 45mm suits CAT D10 N, R, T SU
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick,...
Read More
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick, 16"wide and 39.125"in length. It takes 6 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 6 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 6"from center to center of the bolt holes, and 4.563"when measured from the edge of the bucket cutting edge to the center of the first hole. 9W-6656
$550.00 Plus GST
SKU: 9W6656
Available: 4
Add to Quote
Centre Edge 35mm suits CAT 980 F G H
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick,...
Read More
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 16 inches (406 mm) wide, and 57 inches (1448 mm) long, requiring 3 plow bolts sized 1 1/4 x 4 1/2 inches (31.75 mm x 114.3 mm) and 3 hex nuts sized 1 1/4 inches (31.75 mm); the bolt hole spacing is 19.06 inches (484 mm) center-to-center, and 9.44 inches (240 mm) from the edge of the cutting edge to the center of the first hole.
$550.00 Plus GST
SKU: 1099212
Available: 2
Add to Quote
Centre Edge 35mm D8 N, R, T, D9 L
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches...
Read More
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 53.25 inches (1353 mm) long, requiring 9 plow bolts sized 1 x 3 1/4 inches (25.4 mm x 82.55 mm) and 9 hex nuts sized 1 inch (25.4 mm); the bolt hole spacing is 6 inches (152.4 mm) center-to-center, and 2.63 inches (66.8 mm) from the edge of the cutting edge to the center of the first hole.
$520.00 Plus GST
SKU: 7T9126
Available: 7
Add to Quote
For Hire
4Hire 3 stage Jib Euro lifting range 500/3500kg
AU 3 stage jib suit loader with Volvo/Euro pickups extension from 2250mm to 4940mm lifting range 500/3500kg comes with rated hook & shackle,
Read More
- AU 3 stage jib
- suit loader with Volvo/Euro pickups
- extension from 2250mm to 4940mm
- lifting range 500/3500kg
- comes with rated hook & shackle,
$100.00 – $500.00 Plus GST
SKU: AU24JIBMANEURO-9
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4Hire 3 stage jib Euro lifting range 500/3500kg
AU 3 stage jib suit loader with Volvo/Euro pickups extension from 2250mm to 4940mm lifting range 500/3500kg comes with rated hook & shackle,
Read More
- AU 3 stage jib
- suit loader with Volvo/Euro pickups
- extension from 2250mm to 4940mm
- lifting range 500/3500kg
- comes with rated hook & shackle,
$100.00 – $500.00 Plus GST
SKU: AU23JIBMANEURO-8
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
For Hire
4Hire Hydraulic 3 stage jib CAT IT
HYDRAULIC JIB TO SUIT LOADER WITH CAT IT PICKUPS. EXTENSION FROM 2250mm TO 4940mm
Read More
- HYDRAULIC JIB TO SUIT LOADER WITH CAT IT PICKUPS.
- EXTENSION FROM 2250mm TO 4940mm
$100.00 – $500.00 Plus GST
SKU: AU17JIBHYDCATIT-1
Available: 1
Add to Quote This product has multiple variants. The options may be chosen on the product page
Centre Edge 35mm suits CAT D10 N, R, T SU
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16...
Read More
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16 inches (406.4 mm) wide, and 39.125 inches (993.18 mm) in length. It requires six 1 1/4 x 4 1/4 inch (31.75 x 107.95 mm) plow bolts and six 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 6 inches (152.4 mm) from center to center and 4.563 inches (115.98 mm) from the edge of the bucket cutting edge to the center of the first hole. 9W-6609
$440.00 Plus GST
SKU: 9W6609
Available: 1
Add to Quote
End Bit Hot Cup 50mm RH suits CAT D8 L D9 G H N R T 844
Type: Caterpillar-style bolt-on end bit Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 2 inches (50.8 mm) Width: 16 inches (406.4 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 2 inches (50.8 mm)
  
  Width: 16 inches (406.4 mm)
  
  Length: 24 inches (609.6 mm)
- Fasteners Required:
  
  Seven 1 x 3 1/4 inch (25.4 x 82.55 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.56 inches (90.42 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4197
$350.00 Plus GST
SKU: 8E4197
Available: 1
Add to Quote
9W8365 Ripper Guard
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$300.00 Plus GST
SKU: 9W8365 Ripper Guard
Available: 10
Add to Quote
Half Arrow Segment 50mm suits CAT 980 F, G, H, 988 B, F, 844 J, K
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4"...
Read More
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4" hex nuts; Use Item #9W5734NRC 116-7460
$295.00 Plus GST
SKU: 1167460
Available: 7
Add to Quote
CAT style D10 Ripper Guard suits 100mm Shank
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers. Also: PR500-SH100
Read More
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers. Also: PR500-SH100
$290.00 Plus GST
SKU: 6Y8960
Available: 2
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4194
$280.00 Plus GST
SKU: 8E4194
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4193
8E-4193
$250.00 Plus GST
SKU: 8E4193
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8287
$250.00 Plus GST
SKU: 3G8287
Available: 1
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8288
$250.00 Plus GST
SKU: 3G8288
Available: 1
Add to Quote
AU80GUARDRIP
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
Read More
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
$250.00 Plus GST
SKU: AU80GUARDRIP
Available: 9
Add to Quote
End Edge 40mm suits CAT 980 B, C, F, G, H, 988 B, F, G, H
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28...
Read More
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28 mm) thick, 10.375 inches (263.53 mm) wide, and 22 inches (558.8 mm) in length. It requires three 1 1/4 x 4 1/2 inch (31.75 x 114.3 mm) plow bolts and three 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 3.13 inches (79.5 mm) from center to center and 7.88 inches (200.15 mm) from the edge of the bucket cutting edge to the center of the first hole. 1U-0761
$220.00 Plus GST
SKU: 1U0761
Available: 3
Add to Quote
End Edge 35mm suits CAT D8 N, R, T, D9 N, R, T, 844
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5...
Read More
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5 inches (800 mm) long, requiring 5 plow bolts sized 1 inch x 3 inches (25.4 mm x 76.2 mm) and 5 matching hex nuts; the bolt hole spacing is 6 inches (152.4 mm) from center to center, with the first hole positioned 2.875 inches (73 mm) from the edge.
$220.00 Plus GST
SKU: 7T9125
Available: 8
Add to Quote
AUTOOTHR500
R500 Series/4T 5502 Ripper Boot. Suits our 30/40/50T size Rippers Price per each. Pin and Retainer also available for purchase.
Read More
R500 Series/4T 5502 Ripper Boot. Suits our 30/40/50T size Rippers Price per each. Pin and Retainer also available for purchase.
$220.00 Plus GST
SKU: AUTOOTHR500
Available: 10
Add to Quote
Corner Protector LH suits CAT 960 F, 963 B, C, 966 C, D, E, F, G, GII, H, 970 F, 972 G, GII, H, 973, 977
$200.00 Plus GST
SKU: 2530065
Available: 5
Add to Quote
Corner Protector RH suits CAT 960 F, 963 B, C, 966 C, D, E, F, G, GII, H, 970 F, 972 G, GII, H, 973, 977
$200.00 Plus GST
SKU: 2530064
Add to Quote
AU90ADAPTORJ450
CAT style J450/J460 Twin Strap Excavator Adapter Suits 50mm Lip Part Number: 6I6464 / 8E6464 / 1590464 Model Compatibility: Cat 330 Family: J450/460 Shape: Two Strap Center Adapter ...
Read More
CAT style J450/J460 Twin Strap Excavator Adapter Suits 50mm Lip
- Part Number: 6I6464 / 8E6464 / 1590464
- Model Compatibility: Cat 330
- Family: J450/460
- Shape: Two Strap Center Adapter
$200.00 Plus GST
SKU: AU1590464
Available: 10
Add to Quote
Sold as a Pair

AU30-40TSIDECUTTRENCH
Side cutters to suit AU 30-40T Trench bucket. Sold as pairs. P/n E330 L/R Other part ref: 7y0358LH & 7Y0358RH
Read More
Side cutters to suit AU 30-40T Trench bucket. Sold as pairs. P/n E330 L/R

Other part ref: 7y0358LH & 7Y0358RH
$200.00 Plus GST
SKU: AU30-40TSIDECUTTRENCH
Available: 6
Add to Quote
Sale!

CAT style Router Bit Heavy Duty suits 630 D, C, D, E, G, 631 D, C, D, E, G, 633, D, E 637 D, C, D, E, G, 639 D, E, 650 B, 651 B, E, F 657 B, E, F, 660 B, 666 B
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5...
Read More
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5 - 1" X 3" plow bolts and 5 - 1" hex nuts; the bolt hole spacing is 5.25" from the edge to the center of the 1st hole, 2.5" from 1st to 2nd hole, 3.5" from the 2nd to 3rd hole, 3.5" from the 3rd to 4th hole, 2.5" from the 4th to 5th hole and 5.25" from the 5th hole to the edge; this router bit is 9.5" wide and 22" long
Original price was: $230.00.Current price is: $199.00. Plus GST
SKU: 7J3023
Available: 6
Add to Quote