Shop

Showing 1–36 of 160 resultsSorted by price: high to low

2011 MANITOU MT732 TELEHANDLER WITH FORK ATTACHMENT (On Consignment)
2011 Manitou MT732 3200kg diesel telehandler 2 stage boom, 6.9m lift height, 4m forward reach 1200mm fork tyne dimension, manual fork positioner, 1290mm backrest...
Read More
- 2011 Manitou MT732 3200kg diesel telehandler
- 2 stage boom, 6.9m lift height, 4m forward reach
- 1200mm fork tyne dimension, manual fork positioner, 1290mm backrest dimension
- 4-cylinder turbo diesel Perkins 1104D, torque convertor manual 4 speed transmission forward and reverse
- Features & accessories: torque convertor transmission, 4 speed forward / reverse, 4-wheel drive & steering, wet disc brakes, battery isolator, work lights, e stop, backup alarm, auxiliary hydraulics, manual hitch
- Hour meter (Hrs Showing): 4487 Weight: 7500kg Condition: Runs well
- Service Brakes: wet disc brakes front & rear Park brake: disc & caliper on front driveline / mechanical lever
- Controls: Joysticks x 2
- Colour (Exterior): Red / Grey
- Tyre Size: Front: 15.5 / 80-24 Rear: 15.5 / 80-24 Pneumatic tyres
- Battery Voltage: 12 volt
- Service History: No
- Service / Repairs Required: works lights not working, beacon not working, damaged safety decals, wiper blade u/s, engine cover lock not working, RHR light lens broken, roof air con cover impact damaged, some oil leaks
$57,000.00 Plus GST
SKU: CBL241201
Available: 1
Add to Quote
2012 Bomag BW25RH, 13 to 25t Multi Wheel Roller
2012 BOMAG BW25RH, 13 to 25t Multi Wheel Roller, Aircon cab, ROPS, Water cooled Deutz BF4M 4 cylinder turbo diesel engine, 6636 hours , 3...
Read More
- 2012 BOMAG BW25RH,
- 13 to 25t Multi Wheel Roller,
- Aircon cab,
- ROPS,
- Water cooled Deutz BF4M 4 cylinder turbo diesel engine,
- 6636 hours ,
- 3 speed drive,
- Hydrostatic drive to rear wheels,
- Battery isolator,
- E stop,
- Backup alarm,
- Beacon,
- Twin operator station,
- 8 x tyres
- 11.00-20 maximum weight range with ballast 25t,
- Un-licenced,
- Runs well.
- Ex council
$48,500.00 Plus GST
SKU: SR240601
Available: 1
Add to Quote
2008 Manitou MT932, Telehandler with Fork Attachment
2008 MANITOU MT932 Telehandler with fork attachment Perkins 4 cylinder turbo diesel engine 4 wheel steer 4 wheel drive 3 stage boom 1200 mm forks...
Read More
- 2008 MANITOU MT932
- Telehandler with fork attachment
- Perkins 4 cylinder turbo diesel engine
- 4 wheel steer
- 4 wheel drive
- 3 stage boom
- 1200 mm forks
- Auxiliary hydraulics
- Aircon cab
- Battery isolator
- E stop in cab
- ROPS
- Beacon
- Work lights
- Backup alarm
- 3200kg rated capacity
- 5502 hours
$45,000.00 Plus GST
SKU: SBL240401
Available: 1
Add to Quote
2018 XCMG 3Y152J, Static 3 drum steel roller
2018 XCMG 3Y152J, Static 3 drum steel roller, YC4D85Z-T20 4 cyl turbo diesel, air conditioned cab, ROPS, battery isolator, beacon, operating mass 12000kg or 15000kg...
Read More
2018 XCMG 3Y152J, Static 3 drum steel roller, YC4D85Z-T20 4 cyl turbo diesel, air conditioned cab, ROPS, battery isolator, beacon, operating mass 12000kg or 15000kg with ballast, 2120mm compaction width. 1667 hours, runs well.
$22,000.00 Plus GST
SKU: SR231001
Available: 1
Add to Quote
2010 Wacker Neuson DPU130Le Vibroplate
2010 Wacker Neuson DPU130Le Vibroplate With Lombardini diesel engine, Remote control, Battery isolator, Emergency stop, 272.7 hours, 1170kg, Equivalant to 7 Ton roller
Read More
- 2010 Wacker Neuson DPU130Le Vibroplate
- With Lombardini diesel engine,
- Remote control,
- Battery isolator,
- Emergency stop,
- 272.7 hours,
- 1170kg, Equivalant to 7 Ton roller
$15,000.00 Plus GST
SKU: CP75
Available: 1
Add to Quote
2011 Wacker Neuson DPU130Le Vibroplate
WACKER NEUSON DPU130Le 2011 Wacker Neuson DPU130Le Vibroplate with Kohler diesel engine Remote control battery isolator emergency stop 174.1 hours 1170kg Equivalant to 7 Ton...
Read More
- WACKER NEUSON DPU130Le
- 2011 Wacker Neuson DPU130Le Vibroplate with Kohler diesel engine
- Remote control
- battery isolator
- emergency stop
- 174.1 hours
- 1170kg
- Equivalant to 7 Ton roller
$15,000.00 Plus GST
SKU: CP74
Available: 1
Add to Quote
Bitelli 3 Point Static Roller
Bitelli 3 point static roller Smooth drum Perkins 4 cylinder diesel engine Battery isolator Hydrostatic drive Roller runs and drives Fair condition
Read More
- Bitelli 3 point static roller
- Smooth drum
- Perkins 4 cylinder diesel engine
- Battery isolator
- Hydrostatic drive
- Roller runs and drives
- Fair condition
$7,500.00 Plus GST
SKU: RJV_R001
Available: 1
Add to Quote
Universal Cutting Edge – 250mm x 25mm with 1″ holes.
Boron Steel 450 Hardness cutting edge, 1" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 1" holes with 6" (152.44mm) Hole spacing.
$525.00 – $804.00 Plus GST
SKU: DB250X25-1
Add to Quote This product has multiple variants. The options may be chosen on the product page
Universal Cutting Edge – 250mm x 25mm with 3/4″ holes.
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
$525.00 – $804.00 Plus GST
SKU: DB250X25-34
Add to Quote This product has multiple variants. The options may be chosen on the product page
Universal Cutting Edge – 250mm x 25mm with 7/8″ holes.
Boron Steel 450 Hardness cutting edge, 7/8" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 7/8" holes with 6" (152.44mm) Hole spacing.
$470.00 – $804.00 Plus GST
SKU: DB250X25-78
Add to Quote This product has multiple variants. The options may be chosen on the product page
SOLD OUT _ More Stock Arriving Soon
Centre Edge 45mm suits CAT D9 N, R, T SU
Type: Caterpillar-style bolt-on heavy-duty center cutting edge Application: D9 Caterpillar Bulldozer Design: Double-beveled reversible bucket cutting edge Thickness: 1.75 inches (44.45 mm) Width: 13 inches...
Read More
- Type: Caterpillar-style bolt-on heavy-duty center cutting edge
- Application: D9 Caterpillar Bulldozer
- Design: Double-beveled reversible bucket cutting edge
- Thickness: 1.75 inches (44.45 mm)
- Width: 13 inches (330.2 mm)
- Length: 70.375 inches (1,787.53 mm)
- Fasteners Required:
  
  Twelve 1 x 3.5 inch (25.4 x 88.9 mm) plow bolts
  
  Twelve 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  6 inches (152.4 mm) from center to center
  
  2.188 inches (55.58 mm) from the edge of the cutting edge to the center of the first hole
  
  9W-7043
$795.00 Plus GST
SKU: 9W7043
Out of stock
Add to Quote
Centre Edge 45mm suits CAT D10 N, R, T SU
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick,...
Read More
Caterpillar style bolt on heavier center cutting edge for a D10 Caterpillar Bulldozer. This is a double beveled reversible bucket cutting edge that is 1.75"thick, 16"wide and 39.125"in length. It takes 6 of a 1 1/4"X 4 1/4"(125X425) plow bolt and 6 of a 1 1/4"(125 HEX NUT) hex nut. The bolt hole spacing is 6"from center to center of the bolt holes, and 4.563"when measured from the edge of the bucket cutting edge to the center of the first hole. 9W-6656
$550.00 Plus GST
SKU: 9W6656
Available: 4
Add to Quote
Centre Edge 35mm suits CAT 980 F G H
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick,...
Read More
Caterpillar-style bolt-on center cutting edge for a 980G Caterpillar Front End Loader is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 16 inches (406 mm) wide, and 57 inches (1448 mm) long, requiring 3 plow bolts sized 1 1/4 x 4 1/2 inches (31.75 mm x 114.3 mm) and 3 hex nuts sized 1 1/4 inches (31.75 mm); the bolt hole spacing is 19.06 inches (484 mm) center-to-center, and 9.44 inches (240 mm) from the edge of the cutting edge to the center of the first hole.
$550.00 Plus GST
SKU: 1099212
Available: 2
Add to Quote
Centre Edge 35mm D8 N, R, T, D9 L
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches...
Read More
Caterpillar-style bolt-on center cutting edge for a D8 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 53.25 inches (1353 mm) long, requiring 9 plow bolts sized 1 x 3 1/4 inches (25.4 mm x 82.55 mm) and 9 hex nuts sized 1 inch (25.4 mm); the bolt hole spacing is 6 inches (152.4 mm) center-to-center, and 2.63 inches (66.8 mm) from the edge of the cutting edge to the center of the first hole.
$520.00 Plus GST
SKU: 7T9126
Available: 7
Add to Quote
Universal Cutting Edge – 200mm x 20mm with 3/4″ holes.
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
$292.00 – $510.00 Plus GST
SKU: DB200X20
Add to Quote This product has multiple variants. The options may be chosen on the product page
Centre Edge 35mm suits CAT D10 N, R, T SU
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16...
Read More
Caterpillar-style bolt-on center cutting edge for a D10 Caterpillar Bulldozer is a double-beveled reversible bucket cutting edge that is 1.375 inches (34.93 mm) thick, 16 inches (406.4 mm) wide, and 39.125 inches (993.18 mm) in length. It requires six 1 1/4 x 4 1/4 inch (31.75 x 107.95 mm) plow bolts and six 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 6 inches (152.4 mm) from center to center and 4.563 inches (115.98 mm) from the edge of the bucket cutting edge to the center of the first hole. 9W-6609
$440.00 Plus GST
SKU: 9W6609
Available: 1
Add to Quote
Universal Cutting Edge – 230mm x 20mm with 3/4″ holes.
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
$365.00 Plus GST
SKU: DB230X20-34
Add to Quote This product has multiple variants. The options may be chosen on the product page
End Bit Hot Cup 50mm RH suits CAT D8 L D9 G H N R T 844
Type: Caterpillar-style bolt-on end bit Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 2 inches (50.8 mm) Width: 16 inches (406.4 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D9 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 2 inches (50.8 mm)
  
  Width: 16 inches (406.4 mm)
  
  Length: 24 inches (609.6 mm)
- Fasteners Required:
  
  Seven 1 x 3 1/4 inch (25.4 x 82.55 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.56 inches (90.42 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4197
$350.00 Plus GST
SKU: 8E4197
Available: 1
Add to Quote
Caterpillar Style – 9W8365 Ripper Guard
30T Ripper Shroud, suits our 30/40T rippers. Price per each
Read More
30T Ripper Shroud, suits our 30/40T rippers. Price per each
$300.00 Plus GST
SKU: 9W8365 Ripper Guard
Available: 10
Add to Quote
Half Arrow Segment 50mm suits CAT 980 F, G, H, 988 B, F, 844 J, K
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4"...
Read More
Caterpillar style half arrow, non reversible, center segment for a loader, takes 3 - 1 1/4" x 4" plow bolts and 3 - 1 1/4" hex nuts; Use Item #9W5734NRC 116-7460
$295.00 Plus GST
SKU: 1167460
Available: 7
Add to Quote
Universal Cutting Edge – 150mm x 16mm with 5/8″ holes.
Boron Steel 450 Hardness cutting edge, 5/8" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 5/8" holes with 6" (152.44mm) Hole spacing.
$120.00 – $290.00 Plus GST
SKU: DB150
Add to Quote This product has multiple variants. The options may be chosen on the product page
CAT style D10 Ripper Guard suits 100mm Shank
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers. Also: PR500-SH100
Read More
Caterpillar style ripper guard; takes 2 - 6Y3909 pins and 2 - 4T4707 retainers. Also: PR500-SH100
$290.00 Plus GST
SKU: 6Y8960
Available: 2
Add to Quote
Universal Cutting Edge – 250mm x 20mm with 3/4″ holes.
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
$200.00 – $460.00 Plus GST
SKU: DB250X20-34
Add to Quote This product has multiple variants. The options may be chosen on the product page
End Bit Hot Cup 40mm LH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, left-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4194
$280.00 Plus GST
SKU: 8E4194
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 N, R, T
Type: Caterpillar-style bolt-on end bit Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit) Dimensions: Thickness: 1.625 inches (41.28 mm) Width: 15.875 inches (403.23 mm) Length:...
Read More
- Type: Caterpillar-style bolt-on end bit
- Application: D8 Caterpillar Bulldozer (hot-cupped, right-hand end bit)
- Dimensions:
  
  Thickness: 1.625 inches (41.28 mm)
  
  Width: 15.875 inches (403.23 mm)
  
  Length: 23.5 inches (596.9 mm)
- Fasteners Required:
  
  Seven 1 x 3 inch (25.4 x 76.2 mm) plow bolts
  
  Seven 1-inch (25.4 mm) hex nuts
- Bolt Hole Spacing:
  
  4 inches (101.6 mm) from center to center
  
  3.75 inches (95.25 mm) from the edge of the bucket cutting edge to the center of the first hole
- OEM Part Number: 8E-4193
8E-4193
$250.00 Plus GST
SKU: 8E4193
Available: 5
Add to Quote
End Bit Hot Cup 40mm RH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Right Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8287
$250.00 Plus GST
SKU: 3G8287
Available: 1
Add to Quote
End Bit Hot Cup 40mm LH suits CAT D8 K, L, 825 C
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13...
Read More
Caterpillar-style bolt-on end bit Left Hand for a D8 Caterpillar Bulldozer is a hot-cupped left-hand end bit that is 1.625 inches (41.28 mm) thick, 13 inches (330.2 mm) wide, and 22 inches (558.8 mm) in length. It requires seven 1 x 3 1/2 inch (25.4 x 88.9 mm) plow bolts and seven 1-inch (25.4 mm) hex nuts. The bolt hole spacing is 4 inches (101.6 mm) from center to center, and 2.875 inches (73.03 mm) from the edge of the bucket cutting edge to the center of the first hole. The second row of bolt hole spacing is 3 inches (76.2 mm) from center to center of the bolt holes. 3G-8288
$250.00 Plus GST
SKU: 3G8288
Available: 1
Add to Quote
AU80GUARDRIP
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
Read More
Ripper Shroud, p/n 154-78-31330. Suit 13/20T Allused Rippers xref 195-78-21320
$250.00 Plus GST
SKU: AU80GUARDRIP
Available: 9
Add to Quote
Universal Cutting Edge – 200mm x 16mm with 3/4″ holes.
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
Read More
Boron Steel 450 Hardness cutting edge, 3/4" holes with 6" (152.44mm) Hole spacing.
$100.00 – $230.00 Plus GST
SKU: DB200X16
Add to Quote This product has multiple variants. The options may be chosen on the product page
CAT style Router Bit Heavy Duty suits 630 D, C, D, E, G, 631 D, C, D, E, G, 633, D, E 637 D, C, D, E, G, 639 D, E, 650 B, 651 B, E, F 657 B, E, F, 660 B, 666 B
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5...
Read More
Caterpillar style 5 bolt router bit for a scraper; The 7J3023 router bit is most commonly found on a Caterpillar 631 scraper. It takes 5 - 1" X 3" plow bolts and 5 - 1" hex nuts; the bolt hole spacing is 5.25" from the edge to the center of the 1st hole, 2.5" from 1st to 2nd hole, 3.5" from the 2nd to 3rd hole, 3.5" from the 3rd to 4th hole, 2.5" from the 4th to 5th hole and 5.25" from the 5th hole to the edge; this router bit is 9.5" wide and 22" long
$230.00 Plus GST
SKU: 7J3023
Available: 6
Add to Quote
7FT X 8″ X 1″ Serrated Grader Blade
15 holes Serrated Grader blade, curved. takes 3/4" bolts. 311-7674
Read More
15 holes Serrated Grader blade, curved. takes 3/4" bolts. 311-7674
$220.00 Plus GST
SKU: 3117674
Available: 24
Add to Quote
End Edge 40mm suits CAT 980 B, C, F, G, H, 988 B, F, G, H
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28...
Read More
Caterpillar-style bolt-on end cutting edge for a 980 Caterpillar Front End Loader is a double-beveled reversible bucket end cutting edge that is 1.625 inches (41.28 mm) thick, 10.375 inches (263.53 mm) wide, and 22 inches (558.8 mm) in length. It requires three 1 1/4 x 4 1/2 inch (31.75 x 114.3 mm) plow bolts and three 1 1/4 inch (31.75 mm) hex nuts. The bolt hole spacing is 3.13 inches (79.5 mm) from center to center and 7.88 inches (200.15 mm) from the edge of the bucket cutting edge to the center of the first hole. 1U-0761
$220.00 Plus GST
SKU: 1U0761
Available: 3
Add to Quote
End Edge 35mm suits CAT D8 N, R, T, D9 N, R, T, 844
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5...
Read More
Caterpillar style D8 bulldozer cutting edge is a double-beveled, reversible bucket edge measuring 1.375 inches (35 mm) thick, 13 inches (330 mm) wide, and 31.5 inches (800 mm) long, requiring 5 plow bolts sized 1 inch x 3 inches (25.4 mm x 76.2 mm) and 5 matching hex nuts; the bolt hole spacing is 6 inches (152.4 mm) from center to center, with the first hole positioned 2.875 inches (73 mm) from the edge.
$220.00 Plus GST
SKU: 7T9125
Available: 8
Add to Quote
AUTOOTHR500
R500 Series/4T 5502 Ripper Boot. Suits our 30/40/50T size Rippers Price per each. Pin and Retainer also available for purchase.
Read More
R500 Series/4T 5502 Ripper Boot. Suits our 30/40/50T size Rippers Price per each. Pin and Retainer also available for purchase.
$220.00 Plus GST
SKU: AUTOOTHR500
Available: 8
Add to Quote
Corner Protector LH suits CAT 960 F, 963 B, C, 966 C, D, E, F, G, GII, H, 970 F, 972 G, GII, H, 973, 977
$200.00 Plus GST
SKU: 2530065
Available: 5
Add to Quote
Corner Protector RH suits CAT 960 F, 963 B, C, 966 C, D, E, F, G, GII, H, 970 F, 972 G, GII, H, 973, 977
$200.00 Plus GST
SKU: 2530064
Add to Quote